20 Most Recent Kyocera FS-C5030N Led Printer - Page 3 Questions & Answers

Push in the charge corona assy. Its behind the left door. Each color has a cleaning rod and charge assy. I've seen this more than once.

Color Calibration ( or Color Dentisty adjustment)
The Color Calibration it is done automatically after each batch of 40 or 80 pages and if you need you can do a manual Color Calibration BUT THE COLOR REGISTRATION must be done manually.Do the following:

Go to Menu->Others->Service->Color Registration and print a test chart. Will print a page and you have to read the alignment of some lines Cyan Magenta Yellow Black with some numbers. Check the Advanced user guide for details. Basically you have to read the number / letters of each color where 2 lines are matching. Then you can enter those numbers into the printer for each color.

I have seen things similar to what you describe. Most likely it is due to a PC setting that retains jobs in the queue. Conceivably, if you have a hard drive in the printer, it is a setting that may be corrected by logging in to the printer's IP address. I have not ever seen it caused by the printer, alone.

Generally it means you need a new developer unit.

it depends , if its constantly at the same place this means you have to change the drum(yellow drum) but if its different places, it moves from place to other, this means the cleaning unit is not cleaning good. let me know what happen so i can help you fix, am copier tech specialized for kyocera.
good luck I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

What memory dimms have been fitted.
Print status page see top right. May need more memory and a hard drive.
cheers

Check for the latest print driver and eventually for the latest firmware. You may have to switch the print driver to PCL instead of KPDL (Auto). Ask your service provider to do that if you don't have the knowledge.

Most probably you have to do the Color Registration Settings and the Color Calibration.
The Color Registration will fix the fuzzy printing and the Color Calibration the way how the colors looks. The Color Calibration it is done automatically after each batch of 40 or 80 pages and if you need you can do a manual Color Calibration BUT THE COLOR REGISTRATION must be done manually.

Go to Menu->Others->Service->Color Registration and print a test chart. Will print a page and you have to read the alignment of some lines Cyan Magenta Yellow Black with some numbers. Check the Advanced user guide for details. Basically you have to read the number / letters of each color where 2 lines are matching. Then you can enter those numbers into the printer for each color.

If the Cyan only is off then will be easy ...

sure...check your print manager settings, first, to see if that exit tray is selected as default..

i think you can only use Compact Flash Cards

Replace the developer unit and that will fix it.

The code is for a defective cyan motor. So its either the cyan toner motor or a lump of toner inside the cyan toner container.

Hi,try this: in the printer driver choose imaging and find "color reproduction" button. Just adjust that balck and gray will be printed FROM BLACK TONER ONLY(print black text and graphic from black toner only)

Regards

Go to www.kyoceramita.com and you will see a download centre. You can download the driver from there.

Check cable is secure from pc to printer

Check printer can print a status page via printer keypad and is online/ready

If these are ok then it is a print driver issue

Turn off printer, Unplug usb, delete and reinstall print driver

Try to pull out paper transport unit (when open paper cassette,there is green or blue andle on the printer) and check what is wrong.Maybe just something is in improper position.
Also check paper settings on printer and driver.
If you use 80-90 gsm paper-Plain, if You using heawyveight paper(more than 105 gsm untill 200gsm) -Thick.
BR

The most common machine failure codes is CF---. For example CF248, CF000. In the most cases the printer is need to be upgraded to the latest firmware.

Suggestions at the link below: Thread Kyocera FS 1035 error C7990