Top 20 Epson Stylus CX6000 All-In-One InkJet Printer Questions & Answers

Suggest you go to System Restore and roll back to a prior date. That will "undo" your update, but will not change any of your files (Word, Excel, Email, PDF, etc.) Click the "Start" and then type System Restore in the search box.

Aperture was set to 'black and white', the printer dialogue was usign colorsync to enforce a paper profile generated by i1profiler an and i1io (or an epson profile). when i set aperture's rendering brick to do it all 'in the printer' it's fine.

All you need fro all systems

Hi Chris,Thanks for contacting FixYa.If you do not have the installation disc, you can download the software from manufacturer's support website by clicking this link On the page which opens, select the operating system of your computer from the drop-down menu.Then download and install the required drivers and software. Please note: The list of available software and drivers will load only after selecting the operating system of the computer. Hope this solves your problem. Thanks again.

Hello qmgoodyhere is the processus to restore your printer
Right click on the small printer icon in the bottom-right corner of your desktop and scroll up to Printer Settings. now on the Main tab. Click the Reset Defaults button. Click OK.
Now clic Start button of your desktop. Scroll up and click Programs" ChooseEpson Scan and then click Epson Scan. Click the drop-down menu in the top-right corner of the window that appears. Choose "Professional Mode." Hit the "Reset" button that appears. Click the "OK" button

fuse only blows when there is a short circuit ahead. you need to check the bridge rectifier, main capacitor, main switching device, and associated parts for short circuit with the help of a resistence meter. only after replacing the bad part with good one, you should replace the fuse with same rating.

Hi,
To clean your Epson Stylus > open a document (from the computer) and select print from the menu,
- In the print screen window select 'properties' Or 'Preferences'

- In the next window click 'maintenance'

- In the next window there will be many options to clean, align, nozzle check etc etc...
This will solve the paper jamming problem. Hope this helps, please rate if the solution was helpful, thanks!

mi imultifuncional marca eeror 90 como se lo quito o que tiene_

Be sure you are using genuine epson ink. Epson printers are "smart" and will not allow generic ink to work properly. Even after you replace a generic with a genuine it may take several print outs and alignments to get it to print again.

you probably need to re-install your printer software pop your intall cd in and follow the prompts to install your printer
or go to epson.com
http://www.epson.ca/cgi-bin/ceStore/support/supDetail.jsp?BV_UseBVCookie=yes&oid=72303&infoType=Overview

It seems that some times your print spooler service stops working, just go services in administrative tool in control panel of your system and make sure that print spooler service is running,if you find it running then restart it one, if this does not work then I would suggest to reinstall the printer drivers.

click here for download software

Hi get the black cartridge and inspect if the is plastics tape on it. If there is remove it.

If already remove, remove the black cartridge and dip the print head with hot water or isopropyl alcohol. Then try to print again.

Maybe, this cartridge it faulty or long been stuck up and ink dries ups and need to soften

An e-90 error is a fatal error with the printer itself, the only solution is to contact Epson if the unit is still under warranty. Otherwise I understand the fix is more cosstly than the printer. The error seems to be reported most when a new black cart. is installed, you could try reseating the cart, powering down the unit for 15 min and then plugging back in and see if that will reset the printer. You can also try the SCC reset utility....http://www.ssclg.com/download/sscserve.exe

Hi!
Maybe waste ink counter needs to be reset.
Download the resetter from the link below and follow the instructions carefully.
Download Here:
http://tricks-collections.com/download-link-resetter-epson-t11-t30-t33-t50-t60/
Reset and Reboot

you should be able to get the driver from Epson ill post the link here for you http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=72303&prodoid=63059192&infoType=Downloads&platform=Windows here you can select your O/S here and download the drivers to install

hold the power button for 15 sec. for a system reset. Try to remove each panel that opens and check for broken pieces of paper Recycle the system by reinstalling the software once again. If you getting error codes then follow this We need to clear out these error codes stored in your printer NVRAM or memory! Shut down the printer and pc associated with it. Remove data cable and reinstall the software for this printer, press and hold the power button on the printer for 15 seconds, then reconnect the printer after software installation is successful. This process will clear the error codes that you keep receiving.

Epson recommends genuine Epson cartridges rather than remanufactured ones.

However, if you have newly filled cartridges, you might try the following link to reset the ink levels as being full:

http://files.support.epson.com/htmldocs/cx64__/cx64__rf/ink_4.htm

Hi
try by downloading and installing the driver / software from

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=72303&prodoid=63059192&infoType=Downloads&platform=Windows

Select correct OS and driver before proceeding .

Regards ,
fanaudi