20 Most Recent
Epson Stylus CX6000 All-In-One InkJet Printer - Page 8 Questions & Answers
E-90 error message on Epson CX6000
If the error code
E-90 appears on your Stylus CX control panel display, the print head may not be able to move back and forth freely.
If
the ink cartridge cover is not completely closed, the print head may
have trouble moving back and forth. Follow these steps to close the ink
cartridge cover:
- Turn off the Stylus CX.
- Lift up the scanner.
- Press down on the ink cartridge cover to make sure it is completely closed.
- Close the scanner and turn the Stylus CX back on.
Also
If the packing materials are not removed, the print head will be unable to move and the error code
E-90 may appear on the control panel display. Follow these steps to remove the packing materials:
- Turn off the Stylus CX.
- Lift up the scanner to access the printer area.
- Remove the tape from the ink cartridge holder.
- Close the scanner.
- Turn the Stylus CX back on.
3 gears appear in the window and printer makes
open printer there is a slot beside ink cartiges in the slot there is a plastic gear and a black cam by reclipping cam into its propper place it alowes the ink cartridges to move freely thus solving fault.
to avoid this problem do not force the removal of printed paper
Connected wirelessly to my laptop, and everything
You need to find out why the printer is not returning to an on-hook condition.
My best suggestion to contact the Epson Support team for assistance.
Also, check in your manual for setting the disconnect of the fax line.
Don
The Black is not printing, even after cleaning the
With the EPSON'S you must "Genuine" Epson Cartridges. It does not print good with Generic.
I went thru 2 sets of cartridges, trying to clean the heads alot of times. Finally, had to buy another one.
If you are using generic, change back and see what happens and try again. If not , Good Luck.
:0(
Install printer no disc
download and install the driver from epson.com. that would suffice to make it work on your computer.
Epson CX6000 will not recognize the full cartridge
There is a problem with this printer I had the same one and had the exact same problem called Epson and the told me that part of the board was out and that I could send it to them and they would fix it and it would cost around $200.00 plus shipping. I bought a new printer.
Not finding what you are looking for?