20 Most Recent Dell 926 All-In-One InkJet Printer - Page 2 Questions & Answers

Let me try again: You may already have the answer, but just in case: I'm guessing it's new printer to you and that you've never had a double-sided printer. If that's the case, I can't speak to your particular printer, but it should be in basically the same area.

• Select the printer. Somewhere -- probably to the right, you should see a "Properties" button.
• Click on the Properties button. Under one of the tabs you should see an option for "duplex" or, perhaps, "2-sided" printing. My printers have "two sided" but our networked copier at work has "duplex".
• Simply select that option. ALSO, it will ask you along which edge you want to flip. It's simple with my Brother (home) and HP (work), but the flip-along-x-edge is unclear on the network copier/printer I have to use... so you might have to try it to see which one is the one you want. (for my personal printers, it's "flip along long edge" or "flip on short edge"... can't remember what it is with the network.

Hope this helps you... or someone else, perhaps!

For printing from the computer, I beleive it is 'copy' mode.

I contacted Dell for a disc for my Windows XP. They should have one for Win 8.1.

Change the driver to the correct paper size.

If you haven't already fixed your problem, go to the page below (at the official Dell support site) and select your Operating System. It will take you to a page that allows you to download the driver. Once you select the OS, you'll notice that there are one or more driver links below where you selected the OS. . http://www.dell.com/support/drivers/us/en/19/product/dell-926 Hope this helps. Lee

update drivers for printer had same problem with mine. after update from HP should sell the card as removable media device

get cord for camera to computer

Under Dell 926 you have asked a question about Cannon MP 460. So Beryl which one is it? Also how old because days of ribbon have gone long time ago.

Printer says error 1203

Hello

It means your catridges overflow even from brand new catridges after several prints or right after you refilled the catridges. Check to see if ink are smeared on the holder where the contact panel with the catridge

use a klennex with a few drops of water to dampen and clean off those contact on the holder and your printer should work again.

The refill ink work very well if you let it sit 24 hrs. Then before you print anything, you should run aligned catridges a couple times then run clean catridges a couple times.
Print the test page to see how it looks .
Be sure not to leave any debris of klennex on those holder contact panel.

Place the paper onto the "In" tray of the printer and push the printer guides against the paper to secure the paper in place. Fold the "Out" tray down.

Check out Dell-Amazon-Newegg-TigerDirect-or E-Bay,to see if you can get one on one of these sites.A used one or a refurb will be a little cheaper than buying brand new. Or you may find one at a local computer store in your area. Good luck and I hope that this helps you out...

It means your cartridges overflow even from brand new cartridges after a several prints or right after you refilled the cartridges. Check to see if ink are smeared on the holder where the contact panel with the cartridge.Solution: use the lint free cloth(coffee filter work great) with a few drops of water to dampen and clean off contact on the holder and i think printer will work again. Then before you print anything, you should run aligned the catridges a couple times then run clean catridges a couple times. Print the test page to see how it's look ... If you need any technical help on printer then you can reach at http://www.vtechsquad.com/