Top 20
Brother DCP-330C All-In-One InkJet Printer - Page 9 Questions & Answers
How to replace the adf pickup/roller assembly on a Brother MFC-L8900cdw? Mine is starting to pull 2-3 sheets of paper at a time
To replace the ADF pickup/roller assembly on a Brother MFC-L8900cdw printer, follow these steps:
- Turn off the printer and unplug it from the power outlet.
- Open the automatic document feeder (ADF) cover and remove any paper from the feeder.
- Locate the ADF pickup/roller assembly. It is located underneath the ADF cover and consists of a set of rollers that are used to feed paper into the printer.
- Use a small screwdriver to remove the screws that secure the ADF pickup/roller assembly in place.
- Carefully lift the ADF pickup/roller assembly out of the printer.
- Install the new ADF pickup/roller assembly by aligning it with the mounting holes and securing it in place with the screws.
- Close the ADF cover and plug the printer back in.
- Turn the printer on and test the ADF to make sure it is functioning properly.
If you are having difficulty replacing the ADF pickup/roller assembly or if the problem persists after replacing it, it may be necessary to have the printer serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs.
Powder spreads on drum in 7535 brother printer. What should i do?. Please help
Your Brother printer model 7535's drum may be getting toner powder on it for a number of different reasons.
You might try the following troubleshooting steps:
Make sure the toner cartridge is seated and correctly put in the printer by checking it.
Toner powder may spread on the drum if the toner cartridge is not placed properly.
Cleaning the drum may be necessary if it is unclean or has toner powder on it.
A clean, lint-free cloth should be used to carefully wipe the drum after opening the printer and removing the toner cartridge.
Avoid touching the drum with your fingers as this may leave a fingerprint that can affect print quality.
Replace the drum: The drum may need to be replaced if it is worn out or damaged.
For information on how to change the drum, consult the documentation or manual that came with your printer.
Go at the printer's settings:
Make sure the printer's settings are configured properly for the kind of paper you are using.
Toner powder may spread on the drum if the printer is configured to use heavy or thick paper.
"Unable to init 49 - Brother DCP-T300"
RROR 49 se refiere a la tensi?n de la unidad de impresi?n. Puede que solo necesite que los cables planos que conectan la cabeza a la placa base se vuelvan a conectar, pero tambi?n podr?a ser necesario un servicio t?cnico. Para solucionar el error 49 en una Brother DCP-T300, desconecte la m?quina de la toma de corriente. Deje desconectado durante un minuto completo. Despu?s de un minuto, vuelva a conectar la m?quina. Si el error "Unable to init 49" desaparece, imprima una hoja de comprobaci?n de calidad de impresi?n. Si el error persiste, su m?quina necesitar? servicio t?cnico. Antes de acudir a las opciones de garant?a, se recomienda transferir sus faxes y el informe del registro de faxes. Si necesita ayuda para solucionar el error 49
I want easy directions to set static wireless IP address for Brother HL-2170 Printer
Here are some steps you can follow to set a static wireless IP address for your Brother HL-2170 printer:
- Press the "Menu" button on the printer's control panel.
- Use the arrow keys to navigate to the "Network" option and press "OK".
- Select "WLAN" and press "OK".
- Select "Configure Network" and press "OK".
- Select "Manual Setup" and press "OK".
- Select "IP Address" and press "OK".
- Use the numeric keypad to enter the desired IP address for your printer. Make sure to use a unique IP address that is not already in use on your network.
- Press "OK" to save the changes.
- Press the "Back" button until you return to the main menu.
- Turn the printer off and on again to apply the new settings.
After following these steps, your printer should have a static IP address that will not change. You may need to update the settings on your computer or other devices to use the new IP address in order to print.
How do I When Brother Printer not connecting to WiFi?
When the
Brother Printer not connecting to WiFi device or network, many reasons behind that below mention
Incorrect using the Wireless network
Using the Weak Wi-Fi signal
Brother printer away from Wi-Fi router
Incorrect using the Wi-Fi network setting
Firmware and Printer driver out of updated or not updated with the latest version
Printer driver corrupted condition
SSID or network incorrect using
If you will solve the above reason then your brother printer is easy to connect with a Wi-Fi network.
Now Get resolved the Brother Printer Won't connect to the Wi-Fi network?
Get below the troubleshooting steps to solve the Brother printer not connecting to the Wi-Fi issues.
Step1: Using the correct the Wireless network
Step2: Wi-Fi network must be strong
Step3: Printer placed near the Wi-Fi router or network
Step4: Printer WPS setting must be correct
Step5: Update the Firmware and driver problem
Step6: Use the latest version printer driver
Step7: Correct using the SSID network setting
Next also Read: How to fix the
Brother Printer In Error State?
How to fix a brother hl-l2140 printer that will not turn on?
There are a few things that you can try if your Brother HL-2140 printer will not turn on. First, check to make sure that the printer is properly plugged into an electrical outlet. If it is, then try resetting the printer by unplugging it from the outlet and then plugging it back in. If neither of these solutions work, then you may need to contact Brother customer service for further assistance.
Not finding what you are looking for?