I need to download the Brother MFL-Pro Control Center as my CD is broken, where can I do this from. ?
N
here you go
http://www.brother-usa.com/SiteSearch.aspx?sk=DCP%20130
Posted on Jan 25, 2009
DCP-130C Clean Unable
- pull out the AC plug
- put back the AC plug while holding down the "menu" button and keep holding it (15 sec)
- now you are entering the MAINTENANCE mode and "error 46" pops up in the display
- select 8 by using the arrow buttons ,push OK and select 0 and push OK
- 00:00 00:01 OK (the display is showing this message)
- now push the MONO button 25 times until you see PURGE: xxxxx
- Select 2, push ok, select 7,push ok,select 8,push ok, select 3,push ok
- the purge counter indicates now: purge: 00000
- switch off the printer ,switch it on
- ready to print
Posted on Aug 09, 2012
I have a Brother DCP-130C printer.
There was a printer jam, which has completely been cleared.
However I cannot print because an error code Print Unable 50 error appears or Clean error 50 or 30
I've tried EVERYTHING in the manual but no joy.
Is there a sequence of buttons I can press to clear this error?
No ;-)
The encoder strip switched off the ph and has to be set into place again.
see here how to fix it:
http://www.fixya.com/support/t211210-brother_mfc845cw
(enlarge the browser window to see pics somewhat better)
An advice:
when you have set the encoder strip in pos. again stick some scotch tape on the top of the ph cover where the strip runs thru to prevend the slipping off again on next paper jam ;-)
Posted on Mar 29, 2008
What do we do with a clean unable 50 message on our Brother DCP-130C printer.
Does it have anything to do with the encoder strip if so where to i find it?
It had a paper jam before but when we removed the paper it had clean unable 50 message. We have checked and blow dryed the printer to remove any left over material.
We really need help.
Posted on Jan 22, 2008
the dcp-130c 3 in one printer not working. message appears on the printer screen is init unable 4f. pliz help me. iam really in need to use my printer.
uninstall your printer software under control panel/add remove programs..then reinstall your software again make sure your printer is plug to your pc also...hope this helps..ITTech7574
Posted on Aug 31, 2009
how do i fix clean unable 46 on my MFC-260c printer? plz help!!!!
Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code 46.
Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.This will reset the purge count value. Then restart the printer, hopefully without the
annoying cannot clean message.
Posted on Nov 11, 2009
Brother 130C notice : clean unable 46
i don't understand this notice . Plz help me
IT means you need to reset the purge counter in order to that .
For MFC - 240c
1.Enter mainatanace mode by pressing menu button at time of switch on. and leve the menu button when fax/scan/copy/photocapture button start blinking
2.press *, 8 & 0 and drag the this submenu by pressing mono button to get "purge" eg (purge:9624)
3.Press the 2, 7, 8, and 3 keys in this order to reset the purge count to zero.
4.Press the Stop/Exit . OFF the printer .and turn it on.
Posted on May 02, 2009
Im having problem with my printer, it does print but only black and blue I don't know what happened it just stop printing the 2 colors yellow and magenta, I've cleaned a dozen of times already but still its not printing... please help me with these problem,
after replacing the ink cartridges it took several cleans to come good. I have no idea how to "manually" clean the heads. So I told the printer to do it many (about 7) times. It eventually worked
Posted on Jan 30, 2008
my installer got lost and no where to found.
span.jajahWrapper { font-size:1em; color:#B11196; text-decoration:underline; } a.jajahLink { color:#000000; text-decoration:none; } span.jajahInLink:hover { background-color:#B11196; }
span.jajahWrapper { font-size:1em; color:#B11196; text-decoration:underline; } a.jajahLink { color:#000000; text-decoration:none; } span.jajahInLink:hover { background-color:#B11196; }
You can download the driver from the following link
I hope this will solve your issue.
Brother DCP 130C Driver Download
Goodluck
If my solution proves useful please rate me.
Regards
Arjun
Posted on Mar 27, 2009
My DCP 130c says machine error 4F. Both red warning light and green photo capture light are bliking. What can I do to repair this ? Thanks Gary
Hi
So the Init Unable 4F error means that the machine is unable to initialize, due to a mechanical problem or a foreign object / jam / paper jam inside the machine preventing it from starting up.
Open all the covers (and remove the paper tray and the back cover(s)) and inspect the printer for anything that does not belong to it, reseat or remove your print cartridges and clean any dust or similar out from the machine, also inspect the back cover of the machine, open it and make sure there are no paper jams and noting that doesn't belong there eg paper clip etc..
Once you have done all the above turn the printer on and if the problem remains, pull the power plug or switch it off at the wall (while still having the printer powered on) wait a few minutes and plug it back in and turn on, does the problem remain?
Posted on Jul 08, 2011
463 questions posted
Usually answered in minutes!
422 Questions
395 Questions
242 Questions
245 Questions
120 Questions