20 Most Recent
Brother DCP 130C All-In-One InkJet Printer - Page 8 Questions & Answers
There is unable 46 written
The error message Unable 46 is an indication that the machines ink absorbers are almost full. The ink absorbers hold liquid and dried ink after it has been purged from the print head. These absorbers can control enough ink for the expected life of the machine.
There is a possibility that this message may have occurred in error. Upgrading the firmware of the Brother machine may resolve the issue. Follow the procedure below to determine if a firmware update is required:
-if the display screen is displaying an error message, press the STOP/EXIT key to change the LCD to the main screen.
-press the # and * key at the same time. The first 2 characters on the top row will determine the ROM version.
If the ROM version is OE or greater (example: OF, OG, OH, etc), the firmware does NOT need to be upgraded. If the ROM version is OA, OB, OC or OD, follow the procedure on this link to upgrade the firmware.
If the message "Print Unable 46" continues to appear on the display the Brother machine after completing the firmware upgrade and your machine is within warranty (even if it's not under warranty you have to do the same thing), you have to take it to a Brother Authorized Service Center. http://welcome.solutions.brother.com/BSC/public/us/us/en/faq/faq/000000/002600/000059/faq002659_000.html?reg=us&c=us&lang=en&prod=mfc290c_all&Cat=11
Unable clean 46
the proper reset code sequence to reset DCP printers without numeric keypad should be as follows:
1. press buttons Set, Menu, Mono Start one by one, followed by up arrow key four times. this should all be done as short a time as possible, around 3 seconds.
2. enter maintenance mode 80 by pressing the up/down arrow key and set key to select numbers 8 and 0
3. press up arrow key several times to get to the Purge item
4. enter 2, 7, 8 and 3 using arrow/set keys to reset the counter
5. press Stop/Exit key to go to root of maintenance mode
6. enter 9,9 to exit maintenance mode
How can i solved problems
1. press buttons Set, Menu, Mono Start one by one, followed by up arrow key four times. this should all be done as short a time as possible, around 3 seconds.
2. enter maintenance mode 80 by pressing the up/down arrow key and set key to select numbers 8 and 0
3. press up arrow key several times to get to the Purge item
4. enter 2, 7, 8 and 3 using arrow/set keys to reset the counter
5. press Stop/Exit key to go to root of maintenance mode
6. enter 9,9 to exit maintenance mode
Clean unable 46 dispaly
Try to reset DCP printers without numeric keypad.
Follow this:
1.
press buttons Set, Menu, Mono Start one by one, followed by up arrow
key four times. this should all be done as short a time as possible,
around 3 seconds.
2. enter maintenance mode 80 by pressing the up/down arrow key and set key to select numbers 8 and 0
3. press up arrow key several times to get to the Purge item
4. enter 2, 7, 8 and 3 using arrow/set keys to reset the counter
5. press Stop/Exit key to go to root of maintenance mode
6. enter 9,9 to exit maintenance mode
I need DCP-135C software for
Sorry to read about your problem, I hope this helps you out.
goto hear and hit view to download your driver for the mac
http://www.brother-usa.com/downloads/default.aspx?PGID=5&R3ModelID=DCP130C
I tried to help you. Please help me and Rate/Vote on my response. We take the time to answer your question. take the time to rate us.Thanks and good luck
4 Thumbs - Very Helpful
3 Thumbs - Helpful
I removed all the catridges
Yes! If the unit senses low ink in one of the cartridges it will require you to replace it or it won't print, it's the same if you remove it.
I don't have my manual
Try to reset DCP printers without numeric keypad.
Follow this:
1.
press buttons Set, Menu, Mono Start one by one, followed by up arrow
key four times. this should all be done as short a time as possible,
around 3 seconds.
2. enter maintenance mode 80 by pressing the up/down arrow key and set key to select numbers 8 and 0
3. press up arrow key several times to get to the Purge item
4. enter 2, 7, 8 and 3 using arrow/set keys to reset the counter
5. press Stop/Exit key to go to root of maintenance mode
6. enter 9,9 to exit maintenance mode
Don't forget to vote Thanks!!!
I lost the hardware CD
this is the link you nee for the driver - select your OS and language and it will download - then run it o install
Yellow light toner on all
Did
you check the color status in cartridge option.... Is the yellow color is
recognizing in color status?
Because your status is showing the color (%), means the cartridge monitor
getting the signal from the printer head..as my knowledge there are some issue
in the printer head...which is not able to supply the necessary command for
yellow color in color partition or please check the ribbon carrying signals out
to printer head along. I may suggest you to check this two and take necessary
steps.
Which means the issue is in either cable or in printer head. I will suggest you to get in touch of experienced technician .... Because the
print head and ribbon both are sensitive... so one who wants to troubleshoot in
this part must be careful about this thing....and he must need the instruments.
I cant seem to print
Have you tried printing text in different colour if that works the black jets are blocked- try running the cleaning cycle to clear (it may not use black ink in graphics)
Not finding what you are looking for?