Top 20 Panasonic NV-GS47 Camcorder Questions & Answers

Yes with fire wire cable and fire wire port from camera straight to pc and then you need nero to import the video material to your desktop with out a problem but you need a fire wire port on both camera and pc if you dont have any of those you will need to buy a dvd recorder

Hello there,

You should have the usb cable that came with the camera when you purchase it. Just connect the cable to your computer's usb port and your computer should detect it as a new usb device. To view the contents of the camera, RIGHT click on your windows start button and choose to open Explorer or Explorer. Look for the drive letter associated with your camera under My Computer or Computer. That's it.

You only need Driver CD for this camcorder which is support windows7?

go to driver repair go to computer go to system propertys go to advance system settings. right click camera pluged in port then trouble shoot it it will be yellow mark on it.

The type is SD card.

Use http://www.downloadvideos-convert.com/download-videos-music
1. Download Video Download Studio, install it.
2. Go to the interface, you can download (Automatic capture) the YouTube video there directly. Tab Download to Convert, you can also click "Add" button to upload the videos from computer. You can also edit video by trim and crop functions.
3. After the video display on the Video Download Studio, click "Profile" and choose "General audio", then select an MP3 format. Set destination file, clicking Convert button to complete the task.
Not only convert video to MP3, but also support batch conversion. Safe and easy to operate. No Viruses, No Spyware, No Adware. Do not hesitate. Have a try!

Google a program called
Video Download Studio
then you can use it FREE download video or audio form YouTube, google, metacafe, redtube, dailymotion etc. attention:

download function is no need to register
you can also use it to convert video to audio, video to video, audio to audio.
use it convert video to mp3 mp4 for your iPod
tutorial;
http://www.downloadvideos-convert.com/how-to-use

Good day Sir, here's the link below that contains drivers for your panasonic
handycam. hope it will help you.

drivers

DRIVER CD

I have NV GS 47 video camera. Earlier I used to connect it to computer and write to CD. Now the computer is not even recognising it when connected. I bought a DV data streaming cable. That also is not working. Please help me Baig

If you are a Panasonic Camcorder Service department, you will be supplied one but otherwise, they are not available. Sorry, take it to your Panasonic Authorised repair shop.

Here it is and it is also available on the manufacturers web site. https://www.manualslib.com/products/Panasonic-Pvl453d-Vhs-C-Camcorder-2785065.html

You could get it repaired at an authorised Panasonic repair shop. Not the sort of repair a layman can undertake.

Look for the driver compatible with XP at these sites. You can download the driver for your Panasonic PV-SD5000 camera from the following sources: Internet Archive: You can download the driver files for the Panasonic Palmcam PV-SD5000 camera from the Internet Archive website . The files are available for free download and include drivers for Windows XP. Solvusoft: You can download the latest drivers for your Panasonic SuperDisk PalmCam PV-SD5000 camera from the Solvusoft website. The drivers are updated daily and are certified by Microsoft. HelpDrivers: You can download the driver for your Panasonic PV-SD5000 camera from the HelpDrivers website. The website provides a step-by-step guide on how to download and install the driver. It is important to download the correct driver for your camera and operating system to ensure proper functionality.

See page no: 1-1-5 of service manual PANASONIC PV-42-K PV-S62-K Service Manual download, schematics, eeprom, repair info for electronics experts (elektrotanya.com) for battery location.

No you can't get a free replacement. Batteries degrade with use and age, and bad storage makes them fail quicker.

In the Panasonic PV-GS85 palmcorder, there is typically a manual release option for the cassette mechanism. Here's what you can try to manually release the cassette:

1. Ensure the palmcorder is turned off: Make sure the power is turned off before attempting any manual release.
2. Locate the manual release switch: On the palmcorder, look for a small lever or switch near the cassette compartment. It is usually labeled "Eject" or "Manual Release."
3. Engage the manual release: Use your finger or a small tool (such as a pen or paperclip) to gently slide or press the manual release switch. Apply gentle pressure in the direction indicated (usually towards the open position) while pressing the switch.
4. Open the cassette compartment: While holding or engaging the manual release, try to open the cassette compartment by gently pulling it open. The manual release should override any locking mechanism and allow the compartment to open.

It sounds like your camera is experiencing a mechanical issue with the tape mechanism. Here are a few steps you can take to try and resolve the problem:

1. Power off the camera: Turn off the camera and remove any power sources, such as the battery or AC adapter. This will ensure the camera is completely powered down.
2. Eject the tape: Look for a manual eject button or lever on the camera. It's usually located near the tape compartment or on the side of the camera. Press or slide the eject mechanism to try and release the stuck tape. Be gentle and avoid using excessive force.
3. Gently assist the tape: If the tape doesn't eject smoothly, you can try gently assisting it using a small, non-metallic object like a toothpick or a plastic tool. Carefully insert the object into the tape compartment and try to guide the tape back into the cassette while the eject mechanism is activated. Again, be gentle to avoid damaging the tape or the camera.
4. Reset the camera: After removing the tape or resolving any potential jam, reinsert the power source (battery or AC adapter) and turn on the camera. This can sometimes reset the internal mechanisms and restore normal functionality.

If the above steps don't resolve the issue, it's advisable to contact the manufacturer's support or a professional camera repair service for further assistance. They have the expertise to diagnose and repair mechanical problems with the camera's tape mechanism. Make sure to provide them with all the relevant details about the issue and the steps you've already taken to troubleshoot it.

Having camera issues is always a pain, Here are a few trouble shooting ideas to see if it can solve the issue. try cleaning the playback head: If the audio issue persists with all recordings, it's possible that the playback head may be dirty. Over time, dust and debris can accumulate on the head, affecting the audio quality. Try using a head cleaning tape to clean the playback head following the manufacturer's instructions. Check the audio output connections: Ensure that the audio output connections (e.g., headphone jack, AV output) are secure and properly connected. If you are using external speakers or headphones, try them with other devices to ensure they are functioning correctly. Test with different playback devices: Try playing back the recorded video on a different device like a computer or another video player. This will help you determine if the audio issue is specific to the Palmcorder or if the video file itself is corrupted. Update firmware or software: Check the Panasonic website for any firmware updates or software patches that might address audio playback issues. Follow the instructions provided by the manufacturer for updating your Palmcorder. Lastly Reset to factory settings: If none of the above steps resolve the problem, consider performing a factory reset on the Palmcorder. This will reset all settings to their default values, and it might help if the issue is caused by a software misconfiguration.

It sounds like both of your analog camcorders are experiencing various issues, which may be due to their age and condition. It's hard to determine exactly what the problem is without examining the cameras in person, but some possible issues could include worn out internal components, damaged tape transport mechanisms, or corroded connectors. One thing you can try is cleaning the connectors and contacts on both cameras and their accessories with a small amount of rubbing alcohol and a cotton swab. This may help improve connectivity and address some issues related to power and signal transmission. If cleaning the connectors doesn't work, you may need to take the cameras to a professional technician for repair or servicing. Keep in mind that finding replacement parts for older analog cameras can be difficult and costly, so repair may not be a viable option in some cases. Overall, it's important to remember that these cameras are old and may not function as expected. If you're looking to experiment with analog technology, you may want to consider purchasing newer or better-maintained equipment to ensure a smoother experience.