20 Most Recent
Lexmark X3480 All-In-One Printer - Page 2 Questions & Answers
Hej jag har prolim med lexmark cover open
Det kan vara patronerna i bärselen. öppna skrivarens lucka och ta bort bläckpatronerna. Kontrollera cylinderampullen område för några hinder i bärselen vägen. Om inga, stäng locket. Koppla ur och tag bort skrivaren till strömkällan att återställa sig själv. När skrivaren slås på, sätt tillbaka bläckpatronerna och kontrollera att de sitter i rätt och säkrade. Stäng locket. Försök skriva ut igen.
Hi, my printer keeps saying
Remove the sheets of paper. Open the printer cover and remove the cartridges as well. Close the cover. Then unplug and replug the printer into the power outlet to reset itself. When the printer turns on, reinsert the cartridges when prompted. Load some paper. Check for any error. Try to print.
I need to download a
The Lexmark X3480 is compatible with Windows operating system only. You can download the driver from the Lexmark website using the link:
Lexmark X3480 Drivers. To select the version of your operating system, click on
change OS.
Then click on
FILTER.
Click on the driver under
Recommended Downloads.
Download, execute the file and follow the instructions on your computer.
I hope this information has been helpful. Thanks.
My scan on my all in one doesn't work any more and
This could be a driver issue. Uninstall the Lexmark software by going to the Start menu -> All Programs -> Lexmark 3400 Series -> Tools -> Uninstall. Reboot pc when prompted.
Reinstall using the installation disk.
If problem continues, please contact Lexmark technical support for assistance. If you want, they can do a remote access to your computer and check its settings and do some diagnostics. I'm confident they can get it resolved for you.
When i close the cover the "cover open" is still
Possible cause of the error
This can happen if the lever on the cover open sensor is knocked off the switch assembly.
What to do
Take the following steps to try to determine if there is a hardware fault:
Steps
Actions
1
Remove and replace the cartridges from the printer.
2
Disconnect the power cable and the USB cable.
3
Check that the power cable is plugged directly into a wall socket.
4
Reconnect the power cable.
5
Close the printer cover.
Printer says cover up all
there is a small white switch that falls off if you can find it it needs to e reattached to a small black micro switch which is located just right of the middle of the lid where you see a sloping white piece of plastic
I changed my ink cartridge,
when you open the lid there is a small white piece of plastic witch should be attached to a very small micro switch .this keeps coming off for some reason .you have to find it and reattach it to the switch that is just right of the middle of your printer .hope this helps
My x3480 will not work
Hello,
It seems that you don't have the available printer's driver which is compatible with WINDOWS 7.. Click the link below to go to the LEXMARK site for the driver. Just follow the instructions there and download the driver...
Here's the link:
LEXMARK X3480 Win7 DriverHope this helps. Please don't forget to leave comments and ratings.
THanks
Not finding what you are looking for?