20 Most Recent HP PL5060N 50 in. Plasma HDTV - Page 4 Questions & Answers

SORRY IT LOOKS TO ME UR SCREEN IS SON THE WAY OUT
CALL HP SERVICE CENTER AND TELL THEM UR PROBLEM

Hi


Thanks for using FixYa. From what you have described it seems to be the issue with Y-main however, the logic board should also be checked. These boards are located on the right side of the unit and to check them you’ll have to open the back of the unit. Once you have opened the back also check for any blown/bulged capacitors. All this is only recommended if you have electrical expertise & know how to solder/re-solder components as these units contain high voltages even when in off position. The cost to get this repair will be around $300 and a bit more if the board is replaced. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

There are some parts here: http://www.shopjimmy.com/catalogsearch/result/?q=HP+PL5060N+

http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague

A picture is worth million words in this case.

Generally, red bleeding in plasma TVs is usually caused by bad (or differently adjusted) Y-sustain board as well as bad power supply.

try to find a part number on the board. you can punch this # into google to find a part. hp used different brands so you will have to get the number off the board. look for buldged caps, maybe you can fix the board if it has some. google "bulged cap" to see what they'll look like

the power supply is defected a capacitor filter is leaking.have a tech repair your tv.good luck.

HP doesn't make the price for the main board for your TV available on their website, so you'd have to contact them to get an idea of the cost. Likely it will cost at least $300 but could cost a lot more. If you've had the set for 2.5 years, you'll want to ask yourself if you want to put $300 to $600 or more into the repair of an out of warranty TV when you can purchase a new 42" Viore LCD that's 1080p from walmart.com for $578. Their 32" of the same brand is $349. They have other more popular and more expensive brands as well, but the point is what you'll spend to repair your TV would buy one that is brand new with a fresh warranty. And keep in mind that Wal-Mart's extended 2 yr service plan costs less than $100.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further.

Can you solder and do you know what capacitors are chances are the pop you heard was a cpacitor opening up on top 2200uf 25v

Just turn it around and remove the back cover and take a peep inside. You will find some wax around a capacitor. The capacitor has burst and caused the pop. De-solder it and remove it. Get another of exactly the same specifications and solder it to the module. And happy viewing gain.

My picture is fuzzy now too, but it still turns on ...

It is hard to find a company that will tell you where the parts come from. Most parts you cannot purchase in america.
Here is a website I would suggest that will help you at best!
Please copy and paste in your browser
http://h20141.www2.hp.com/hpparts/partsdirectory/catalog_solutions_AP.htm

The location of the reset button on the Logik LPV 09 HP would likely be in the owner's manual or on the company's website. It is also possible that the device does not have a physical reset button and can be reset through software or by unplugging the device for a certain amount of time. If you cannot find the information in the manual or on the website, you should contact the manufacturer for assistance. if i was able to help my cashapp $ralphpapi thank you have a blessing day

This is most likely related to the wrong drivers or missing codecs for video playback. You did not post the type of computer or the operating system information though

If you wish to get some details; check the site linked here. Pull up older posts. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/ faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. Search the site by type in the brand name of your set, in its search bar at the right side column, and press enter.

does tv device have a hdmi-1 input does laptop have a hdmi-1 output port https://en.wikipedia.org/wiki/HDMI

All HP iq77x all-in-one PCs suffer from the same problem of a faulty motherboard. This is primarily a soldering issue on the graphics chip,which develops cracks in the solder balls. The PCs contained a separate graphics card, which goes faulty first. This can be removed and the display connector can be moved on the motherboard to use the on-board graphics. This will eventually show the same issue. A short term fix was to heat the graphics chip with a hot air gun or other means (plenty of suggestions can be found on-line) which sometimes works for a few weeks at most. The only 'permanent' fix is to have the chip professionally removed and re-soldered; an expensive option. If you are lucky, your PC is still wired to use the add-on graphics card, in which case you might be able to remove this and rewire for the motherboard graphics.

look on your f buttons f5 on mine