20 Most Recent
Canon PIXMA mini260 InkJet Photo Printer - Page 9 Questions & Answers
Printing issues double chars or vertical cuts
I had apply this tip to my printer but it can be applied to any jet printer.
If the printing results are similar to the ones on the photos
Maybe your encoder/timing belt is with some dirt. This can happen mainly after a paper jam removal.
You need to clean the strip :
To do so use a
cotton bud embeded with isopropyl alchool or similar and clean the front and the back.
The use some dry fabric (soft) or soft tissue to do the final clean up.
Finnaly use the clean functions of the priter to filnalize the cleanning.
That should fix your issue.
Canon Pixma 8500 - will not print Cyan
Hi. Missing color printing means the print head is defective and need to be replaced. Print head is expensive, Waste ink full warning can be disabled with a program ( canon software tool ) I advice to get technical support. Or buy a new printer
Canon pixma mp 500
Hi. I am not sure but does your model use a print head . If it does . You need to perform a deep clean of the print head
INK RESET IN CANON PIXMA MG3100
First off..Law has it that Printer Manufactures can not restrict their machines from using cartridges from other vendors. So you can purchase less expensive carts from the likes of
www.inkjets.com. Why bother refilling when they are so cheap and the carts are actually new. Carts with print-heads built in are tested and work great. When line appear, the print head is plugged up. You may simply have a cartridge with ink that fits into a separate Print Head and locks into place. If so, that Print head is no good. It should be replaced, or run under very hot water for 10 minutes, both sides, until no ink is visible. Dry on a soft towel and do not touch the metal parts. Replace and do a printer test. That's it.
I have a Canon Pixma iP1900, it will initially
Hello -
From Support information I found on the Canon website, the paper feed rollers of your PIXMA iP1900 may need cleaning.
Source:
https://www.canon.co.uk/support/consumer_products/content/faq/?itemid=tcm:14-609974
The feed roller cleaning function allows you to ckean the paper feed roller. perform feed roller cleantng when there are paper particles sticking to the paper feed roller and paper is not fed properly.
The procedure for cleaning the feed rollers is as follows:
1.Prepare the printer
Remove all sheets of paper from the rear tray.
2.Open the printer driver setup window
3.Click Roller Cleaning on the Maintenance tab
The confirmation message appears.
4.Execute paper feed roller cleaning
Make sure that the printer is on and click OK.
Paper feed roller cleaning starts.
5.Complete paper feed roller cleaning
After the rollers have stopped, follow the instruction in the message, load three sheets of plain paper into the rear tray, and click OK.
Paper will be ejected and feed roller cleaning will be completed.
+++
Best wishes.
Not finding what you are looking for?