20 Most Recent Canon PIXMA mini260 InkJet Photo Printer - Page 10 Questions & Answers

Go to this website and download the User Manual, quickstart manual. deivers and any firmware upgrades and software: https://www.canon-europe.com/support Please note ths is the European support. If in the US etc then it will allow you to link to your own platform.

Factory reset

This a problem with your Canon Easy-PhotoPrint EX Software you should do a fresh installation if you have a software discs supplied with it - uninstall software and all drivers then install software plus drivers. Finally update drivers through device manager in Windows. Have look at this guide if you have no software discs and dont know where to start - https://www.canondrivers.org/canon-pixma-mp258-scanner-driver-printer-download/

I have found these and hope they might help you. Here is the User Manual Link: https://www.canon.co.uk/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mg_series/pixma_mg5350.aspx?type=manuals&language= OR maybe this may help: How do I get my Canon Pixma to scan? Just follow these instructions. Install the MP Navigator EX software located on the disc that came with the printer. ... Select "Start" > "Programs" > "Canon Utilities" > "MP Navigator EX" > "MP Navigator EX". Select "Photos/Documents". Open the top of the scanner and place the document you wish to scan on the glass.

Get drivers/information for your printer here: https://www.usa.canon.com/internet/portal/us/home/support/details/printers/support-inkjet-printer/ip-series/pixma-ip90?tab=drivers#Z7_MQH8HIC0L88RB0AMD0F1Q42K25 Good luck.

The USB port is on the back of the printer on the right-hand side if you turn the printer around. It's above the telephone jacks. For a good picture of the ports, see http://ugp01.c-ij.com/ij/webmanual/Manual/M/MX450%20series/EN/BG/Bg-Component1200.html . I hope this helps. Cindy Wells

Turn off the Printer and Unplug it from the Power Supply. Remove the Cartridges from the Printer!!!!! On the Backside of the Cartridge you would see a Copper Stripe, Wipe the Copper Stripe using a Paper Towel! Reinsert the Cartridges and Restart the Printer.

Easy call this number 1-800-652-2666 give them the model number and problem Canon has excellent service.

Check the printer is listed as "shared" on your partner's machine and it is available to all users.

You may not have enough room on your hard drive to install the drivers. If you have a previous canon printer driver installed, you have to completely uninstall it, too.

Vista is obsolete. Driver and security issues will drive you nuts! Time to upgrade to Win 10.

The manual and Canon website just say, contact the Canon service centre. Please check what the net has to say about waste printer ink. When the printer "thinks" the reservoir is full, it could give this error. (not sure if it is the same number) But for some brands you can get little programs to reset that counter. I recently did so for my Epson printer. Perhaps you should look there. Emptying the reservoir won't reset the counter, but you also should clean out the ink in the waist ink reservoirs.

From http://www.refreshcartridges.co.uk/igloo/clearing-canon-pixma-error-message-e13-e16/ Locate the STOP/RESET/RESUME button on your printer which is represented by a triangle within a circle on the body of your printer and is usually in red, white or black as pictured below. With the reset button located hold it down for at least five seconds and then release it.

Hi. Your machine has problem with the scanning sensor . Get technical support

use a different scan mode,like the one that came with computer

canon does have their software for your printer online on their website but if your printer is having issues being plugged into one USB port try another if not remove all driver software related to the printer in device manager and try installing once more hope it helps....