Top 20 Lexmark X5470 All-In-One InkJet Printer Questions & Answers

Karen, Sounds like your card may have went bad. A good way to check this would be to use a different memory card. Hope that helps! Good luck! Sincerely, Jeremiah

What type of printer you're using?

Please find a full software driver for your printer and also it has to be compatible with your OS ( operating system ) the full software has the scanner and printer software in it . Once u download ! Then install . Start enjoying your device and problem won't occur again

Have you tried plugging it in without surge protector? Also, open front cover and make sure there isn't another power switch in there. Some Lexmark's have a push power button on control panel....but have an actual physical power switch on the inside of the front cover. So it may not be fully powered off. I am a Lexmark Tech, I've seen this on a few models.

Push and hold the 'Start" button after it fires up to turn it off. It should stay off after that. If that doesn't solve your problem then if you have it hooked up via USB cable just leave it unplugged until needed. If you are running it through your WiFi you can always just change your WiFi setting to Manual instead of Auto.

hi u can buy them on E/BAY..type in e/bay search---- 2- prong AC power cord cable lead for Lexmark printer scanner ac adaptor charger cost AU $3.20 good luck

Please try following steps:- 1) Check if your printer is power on 2) Cross check the usb cable 3) try changing the usb ports on laptop / desktop if nothing works 99% your printer is not working

There is not a Windows 7 driver available for this printer. That said, many devices will function under Windows 7 using the Windows Vista drivers.

http://top.windows9download.net/list/lexmark-4425-004-printer-driver-ocr.html there you go hope that helps

I have a fix-all solution for you ink-jet printer people(only if it not a plotter). If it doesnt work after replacing an ink-cartrdge or print-head, through it away (recycle it) and by a LASER PRINTER. FIXED

Have you replaced the ink? Perhaps one color is low or one of the pin-heads is broken. If the pins on the printer have broken you will need a repair technician or just buy a new printer.

dont open it, just spray with a contqact cleaner spray inside the paper feeder , you will see the pick up roller.

If your pc tels you its downloading application, have a look a your printer drivers, your usb cable connecting your pc to printer and or the data cable inside the scanner might have gone faulty

What OS are you running? Vista driver works for Win7. Go to Lemark's support page and download the driver bundle.

Go to internet onto lexmarks official site, go to their driver downloads and or support. type in your printer name and number, and your operating system and download full driver

You may download the Lexmark X5470 driver from http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X5470&segment=SUPPORT&userlocale=EN_US&frompage=null#1

You may download the Lexmark driver from http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X5470&segment=SUPPORT&userlocale=EN_US&frompage=null#1

You may download the X5470 driver from http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X5470&segment=SUPPORT&userlocale=EN_US&frompage=null#1