20 Most Recent MSI PM8M-V Motherboard - Page 5 Questions & Answers

Download here at MSIhttp://www.msi.com/product/mb/PM8M-V.html#/?div=Driver&os=XP%2032Good luck

Download your drivers here at MSI:http://www.msi.com/product/mb/PM8M-V.html#/?div=Driver&os=XP%2032Good luck

You have the wrong type of power supply. This is an ATX motherboard.

http://www.msi.com/product/mb/PM8M-V.htmlHover your mouse cursor on Download.(Overview / Specification / Download/ Support / Where to buy )In the drop down lost click on Manual.Under the heading - Download, click on the blue -M7104v1.0.zip (2005-08-09)On the next page click on the country name nearest yours.A small window will come up on the right -Opening M7104v1.0.zipMake sure there is a Green dot in the small circle, to the left of Save File.If there isn't left-click in the small empty circle, to the left of Save File.Now click on OK below.A small window will come up on the left. Allow the file to fully download, then DOUBLE-click right on the file name.In the next window go to the far left, and click on Extract all files.In the next 3 small windows click on Next, Next, and Finish.In the last window DOUBLE-click on the red Adobe PDF icon, with the MSI file name next to it.Regards,joecoolvette

Check device manager for errors. Just might need to re-install drivers.

During the boot process you will see on the screen to press a certain key to enter setup usually the Delete or the F2 key Press and hold that key during the boot up process to enter BIOS the using arrow key scroll down to advanced bios features press enter change your first boot device to cd,press escape then press f10 to save to cmos to restart note this will erase you operating system you will have to have an operating system disk to load it onto you hard drive or create a partition to load another operating system (note after you have loaded the operating system you should go back and change the first boot device to your failsafe or optimized defaults) after windows has loaded your computer will automatically restart it might restart 2 times one to finish the installation the next will be because the operating system is loaded and will boot from your cd during the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS using the arrow keys load failsafe defaults or load optimized defaults press escape then press f10 to save to cmos to restart otherwise it will keep booting from the cd /dvd drive hope this helps

You can download it from HERE, the manual is inside that winzip file as a pdf file. And the details about the Front Panel Connection is on page no. 24 of the Manual. Here's a screenshot for you:


Let me know if you need further help.
Good Luck.
Thanks for using FixYa.

Go to the link below and download the VIA 10/100 LAN Drivers for the operating system you need it for.Link:http://www.msi.com/product/mb/PM8M-V.html#/?div=Driver&os=All

http://www.msi.com/product/mb/PM8M-V.html#/?div=Driver&os=XP%2032

Hi,

You can download the manual by clicking this link:

http://download3.msi.com/files/downloads/mnu_exe/M7104v1.0.zip

The connections for JFP1 and JFP2 are given on page 13 of this manual.

Hope this solves your problem. Thanks for using FixYa