20 Most Recent American Standard WCZ036F Air Conditioner - Page 4 Questions & Answers

Your question makes no sense. You dont have a heat pump with ONLY emergency heat. Is it working or not???

https://www.americanstandardair.com/owner-support/symptom-checker.html

This lights blinks a sort of Morse code, a number that corresponds to a chart located somewhere on the furnace. It's usually on the doors that you remove from the front. For example, a "dot...dot...pause...dot...dot...pause" would be the number 2, which the chart may say indicates something like "ignition failure" or "pressure switch open."

Would need more info, which door are you talking about? Blower door with power switch? At what point in the firing sequence does the unit fail? So the burners ignite?

What relay does he click?

I'm seeing 22 as a loss of flame. Unfamiliar with gas and oil, I'm in south Florida. Does say it locks out for 1 hr and will retry, possibly cycling power will reset lockout but unlikely to fix problem. If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

Does it cool when in heat? Is this a heat pump? What's supply air temp vs. return air temp? Outdoor unit running? If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

The number of flashes indicate a fault there is a code on the door panel

low pressure error If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

You should look at your furnace and see if any safety lights are flashing. Make sure your thermostat is set to heat.Check system your using for updates.

I see so many problems with these. make sure your thermostat is set to heat. if its hard wired simply turning it to the degrees it shows a bit past, should turn it on.If not check the heat source for any blinking lights which means a malfunction on the heaters it self... If you checked fuse box sometimes to flick the switch to off and back on does the trick to reset it.

Wow, you are going to have a heck of a time finding that. Try contacting American Standard. They may be able to help you.

http://myfurnace.net/american-standard/manuals-specifications-literature

what model number. If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

123 I believe is a configuration error. touch the error on the screen and see what it details. let us know. If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

likely a tripped float switch. need to vacuum drain and clear the float switch. If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79