Royal Alpha 1000ML Cash Register - Answered Questions & Fixed issues

Hi, There appears to be a design flaw with this particular model. We opened it up to notice that the wires connecting to the customer display was cut off. Why? Because if you even remotely try to turn the cover up towards the sky as it is functionally allowed to, the wires get ripped off. The solution we came up with was to open it up (it's not that bad) and re-solder the wires back and prevent the customer display from turning the head all the way up. You'll be able to see what wires need to go where by seeing how it is connected to the main board. Hope this helps.

1 or 2 gigs, larger did not work for me.

I haven't worked with the 1000ml but you usually have to enter special codes or reset the machine to clear the GT as it is the last line of defence against fraud. There seems to be a manual on line that should have what you need:https://the-checkout-tech.com/manuals/cashregisters/Royal_Alpha-1000ML_operation_and_programming_manual.html

Edit>Preferences>quicken preferences>register and then click on Fonts

It needs a loop reset. Or just take out the memory battery and disconnect all power.After 5 sec, re-connect power

Amazon.com: Customer Reviews: Learning Resources ...

www.amazon.com/...Register/product.../B0006N8X3...

Amazon.com, Inc.Learning Resources Pretend & Play Teaching Cash Register ... However, it recentlystopped working and simply said 'DRAWER OPEN' no matter what we tried ...

Casio - Support

www.casio.com > Home > Support > FAQs

CasioFrequently Asked Questions - Cash Registers. ... How I fix my cash register if the Journal/Receipt is not printing? How do I load paper in my cash register?

Not Assigned Error Message On Sharp Cash Register ...

? 1:06 https://www.youtube.com/watch?v=cq1_zcY_DuQ Jul 12, 2010 - Uploaded by shopstuffltd Instructions on how to clear the 'Not Assigned' error message on the Sharp XE-A203, XE-A213 or XE-A303 ...

"Head Up Error" on a Sharp cash register - YouTube

? 2:53 https://www.youtube.com/watch?v=NXMbLjfjdro Jan 15, 2013 - Uploaded by sharpelectronicsusa Clearing the "Not Assigned" and "Head Up" Error on the XE-A40S, XE-A41S, XE-A42S, XE-A401, XE-A402 ...

Re: Cash register notification stopped working - The eBay ...

Sorry for late answer. It usually means the batteries were flat or faulty and the memory could not be supported during the power cut. Also, a high voltage surge can come down your mains if high voltage lines cross yours (say in a car crash with power pole) which can cause a serious overload in equipment.

You need to use the clerk programming codes from the manual. i don't have any codes for this model as it is rare. One of the users has info here: https://the-checkout-tech.com/manuals/cashregisters/Royal_Alpha-1000ML_operation_and_programming_manual.html

It sounds like it has a jammed or broken printer. Have it checked by a service centre

I haven't worked with this model but there is often a partial reset that you can do to jump the register back to REG mode. You need to check the programming manual for this. If you need a manual, one of the users has it here: https://the-checkout-tech.com/manuals/cashregisters/Royal_Alpha-1000ML_operation_and_programming_manual.html

Royals are quite rare as they are only sold in certain areas. I don't have any information for this model. Check the programming for the percent button. If you have lost your manual, there is one on the net that I send my customers to: https://the-checkout-tech.com/manuals/cashregisters/Royal_Alpha-1000ML_operation_and_programming_manual.html Hope that helps

Try C-tech for the codes. Royal doesn't give them out to end users: https://the-checkout-tech.com/manuals/cashregisters/Royal_Alpha-1000ML_operation_and_programming_manual.html

Royal don't tend to give out this info. and this model is rare to find. You will need the code for Journal clearing. I've found that it varies too much between registers to guess it by other ones. For the royal machines, I usually just send customers to buy the manual from the supplier. There is also a PDF manual on the net if you need one quickly: https://the-checkout-tech.com/manuals/cashregisters/Royal_Alpha-1000ML_operation_and_programming_manual.html Sorry I can't help further with this model

The 1000ML is quite rare. Royal don't give out this info. I ended up sending my last few customers to this site: https://the-checkout-tech.com/manuals/cashregisters/Royal_Alpha-1000ML_operation_and_programming_manual.html Hope it helps.

You can download the manual from here: https://www.royalsupplies.com/cashreg/1000ML_Instruction_Manual_eng.pdf Refer to page 30

Check if you have pressed well the plattern

royalcashregisters.com/

Do an initial reset

Take out the memory batteries and them back while unplugged

Go to print option and select print-density and increase it