Top 20 D-Link Dlink DI-514 Air Wireless 2.4 GHz Router (A0177337) Questions & Answers

Configure your network with an administers pass word and other computers won't be able to access.

Sounds like your WiFi router has gone back to factory defaults. There may be a button on the front of the WiFi unit that when pressed allows for a short period of time for your ps4 console and other devices to pair with it by selecting on those devices the same setting. This will allow the devices to work correctly.

here is the manual look threw it and it should resolve your problem. http://www.dlink.com/-/media/Consumer_Products/DI/DI%20524/Manual/DI_524_Manual_EN_UK.pdf

using your web browser log in to the router if u cant loin wirelesly use lan cable acess the router using its ip address go to wireless tab the to security tab and then activate whic ever level of security u want , good luck

DD WRT is a firmware upgrade sight you can find wonderful firmware upgrades that make your router come to life and Evan worth more than you payed for your original router, check the router database and see if your router is listed and capable for an upgrade to dd wrt, i did it with my dir615 and it gave me a whole host of additional optins for configurations , it was a long search for "dd wrt" but well worth it.

Does your question have anything to do with "problems with routers"?

May be simply out of its signal range blocked by the building construction such as brick walls. WiFi uses wireless radio transmission, so is restricted to how much it it can send and receive like a normal radio. Obstructions absorb the power over greater distance, therefore you may need to relocate the device closer to where you need the signal to be strong

Try a factory reset

This is an old post, but just in case someone else needs this...The dlink website for the Di 514 rev B version actually links to the rev C versions' firmware. I got the same error.browse to here ftp://ftp.dlink.com/Gateway and grab the right version for your rev B device.Best,Kevin

Try the user manual: http://www.arrisi.com/support/documentation/user_guides/_docs/ARRIS_Router_Setup_Web_GUI_UG.pdf

Okau you have to do is that you have to have a intrent cord and a mouse cord and a keybored cord and then you need to get speakers and the others get rid of it okay

Look for Virtual Servers in the web admin. It sometimes maybe referred to as Port Forwarding.

Hello visit the homepage:http://www.dlink.com/us/en/supportAnd download a user manual.Or:Resetting your D-Link router's Wi-Fi password is easy:

• Type your router's IP address -192.168.0.1- into your Web browser.
• At the login screen, select "Admin" from the drop down menu and enter your admin password.
• Once you access the Web configuration screen, click "Setup" in the top menu.
• Select the "Wireless Settings" link on the left-hand side.
• From there, click on the "Manual Wireless Connection Setup" button.
• Scroll down to the field representing my "Pre-Shared Key". If you don't see it, select a security mode from the dropdown menu at the bottom of the screen first.
• Type in a new password. (I use a hybrid WPA/WPA2 security mode.)

The Forgotten Admin Password If you forget your Web configuration password, you're stuck: you have no way to change any settings on your router. Your only recourse is to use a paperclip or other pointy object to reset your router to its factory settings. With the paperclip, hold down the tiny reset button on the back of your router for about five seconds. Your router lights will blink to confirm the factory reset. You can now use the router's default password to log into its Web configuration screen (look in your router manual if you can't remember what this is). Once you're in, be sure to change this password to something unique.Remember to save your settings when your done.Good luck

You can reset you router to it's factory default settings:Have you somehow lost your D-Link router's password? Perhaps the easiest way to gain access to your router's admin interface is by restoring it to the default factory settings, however, if that is not possible, try method number two via the master password. If you lost your WEP password, visit this post for more info - Recover Lost WEP Wireless Network Password Key.I hope this information will be helpful. Thank you for using FixYa!

Hi,

You can try the following,

• Use the router's adapter in other wall outlet
• Try another working adapter if available
• If you don't have additional adapter, take it to local store and check with a new adapter
• If that works it's your adapter which has gone bad
• If it still wont work, you router needs a repair/ replacement

Regards,
Shrey

Unfortunately, all the firmware appears to be in english for this model that I can find, but you can try going to d-link.com and choose the country of the language you wish, and see if firmware is available in that language.
CAUTION! Using firmware from a country other than the country of origin of the router MAY RENDER THE UNIT INOPERABLE.
Attempting to flash the unit with firmware from another location is NOT recommended.

Check the link: http://support.dlink.com/emulators/di524/help_faq.html .

No, you should not need a driver for your wireless router.

In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between 10 and 30 seconds depending on the router. You may need a pin or something small to push in the button, because it can be recessed. Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. This means you will lose all of the changes you made since you got the router. Make sure to write down any things you've changed, so you can change them back after the reset. Also, I recommend updating to the latest firmware after the reset.

There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

Note that your D-Link is outdated and there is no support at D-Link site.

turn fire wall off then try, then go back to fire wall then put it on med.