20 Most Recent D-Link AirPlus Xtreme G DI-624 Wireless Router (DI624RE) - Page 5 Questions & Answers

It will only find the router that way on the computer you installed the software on.

you have to connect to either the wireless network first or plug an ethernet lead into the computer from the router, it wont just connect to the wireless because its there

If the default password has been changed then -
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your computer's LAN port, open a browserand enter the D-Link's configuration URL. OR open the browser on your laptopand enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now configure the wireless settings. To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Hi,

Plug the lan cable from Modem to the Router Wan / Internet port. From Lan port ( Router) you can connect to switch or computer if you have any . Or connect computer via wireless.

That' all

http://www.dlink.com/products/?pid=6
you can download them here

If the default password has been changed then -
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your computer's LAN port, open a browserand enter the D-Link's configuration URL. OR open the browser on your laptopand enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now configure the wireless settings.

Type in your IP address and it will take you to your router configuration

this is a very old router and having had that router with the same issue i would replace it (first check your wireless card with another wifi to make sure it isn't the router...)

To change the password of your wireless router, you would need to access the user interface of the router.
- launch internet explorer
- go to 192.168.1.1 (that is the normal router address) if you have any you can type it.
- once you are in the router user interface locate security options and from there you can find or access changing the password for your router.

Cheers . . .

I will be able to help you with this. First can you tell me the model reversion of your D-Link router. Look on the bottom and see if its Reversion A, B, C, D, or E. Then we can go onto securing the router.

Hi,

Login to the router and you will have the option to disable security in the settings page.

In case you would like to wipe everything clean you will need to hard reset the router for this.
There is a small hole at the back of the router. Use a straightened paper clip to press a button in that and hold for 10 seconds, till you see all the lights blink on the router.

Once this is done, the router will be back to its factory default settings.

If this doesn't work for you, please comment and let me know, and I will be happy to assist you to further resolve your issue.

I will appreciate your feedback and positive rating for this solution.
Thank you.

Chances are you typed in the wrong network encryption key.

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 15.0px Arial} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 16.0px Arial; min-height: 18.0px} p.p3 {margin: 0.0px 0.0px 0.0px 0.0px; line-height: 18.0px; font: 14.0px Arial}

iPad wifi is "n" mode (faster) and this router is capable of both 10 Mb and 100 Mb (the latter, "g"mode). Have you already tried to configure it to work only in the "g" mode (and not in both modes as preconfigured).

Briefly, connect a cable from your PC to your router using one of the computer ports (not the cable modem port). Then, in your web browser, type the address http://192.168.0.1 (as you did), which should be the router address. You'll be prompted to enter the user (which is "admin"); leave the passed field blank (unless someone else have configured it differently). Now, run the wizard and you should be done. Additional configuration steps involve creation of WPA/WEP security in your WIFI network (usually, very relevant).

If I understood it correctly, you need to broadcast your SSID from your router (alternatively, you want only to know your SSID; in both cases, go to your router configuration). There's an option to do that, simply go to the router address at http://192.168.0.1 from your computer. You'll be prompted to enter the user (which is "admin"); leave the passed field blank (unless someone else have configured it differently).
Hope it helps!

Try to connect directly with your cable modem to see if the internet signal is OK.
If yes, try to reconfigure the modem again. First of all, connect a cable from your PC to your router using one of the computer ports (not the cable modem port). Then, in your web browser, type the address http://192.168.0.1, which should be the router address. You'll be prompted to enter the user (which is "admin"); leave the passed field blank (unless someone else have configured it differently). Now, run the wizard and you should be done. Additional configuration steps involve creation of WPA/WEP security in your WIFI network (usually, very relevant).
Hope it helps!

In the router setup, have you tried to disable "turbo G" option and click on "channel auto select" option? If your hypothesis of interference is correct, this may allow the router to choose a channel with less interference. Hope it helps!

Are you trying to access the router with a cable connected to one of the computer ports (1-4)? Wfi may not work; neither the WAN port.

Briafly, connect a cable from your PC to your router using one of the computer ports (not the cable modem port). Then, in your web browser, type the address http://192.168.0.1 (as you did), which should be the router address. You'll be prompted to enter the user (which is "admin"); leave the passed field blank (unless someone else have configured it differently). Now, run the wizard and you should be done. Additional configuration steps involve creation of WPA/WEP security in your WIFI network (usually, very relevant).
Hope it helps!

Are you sure you need to update it? Latest version, to my knowledge, is 2.76.
Go to http://www.dlink.com/products/?tab=3&pid=DI-624&rev=DI-624 and then look for "support resources" and firmware.
Good luck!

Pardon que je peut ecrir seulement en Anglais...
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 16.0px Arial} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Verdana; min-height: 17.0px} p.p3 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Verdana}

First of all, connect a cable from your PC to your router using one of the computer ports (not the cable modem port). Then, in your web browser, type the address http://192.168.0.1, which should be the router address. You'll be prompted to enter the user (which is "admin"); leave the passed field blank (unless someone else have configured it differently). Now, run the wizard and you should be done. Additional configuration steps involve creation of WPA/WEP security in your WIFI network (usually, very relevant).

Hope it helps!

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 16.0px Arial} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Verdana; min-height: 17.0px} p.p3 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Verdana}

No need to install software. Consider your router as another "computer" that opens the internet to your primary computer.

First of all, connect a cable from your PC to your router using one of the computer ports (not the cable modem port). Then, in your web browser, type the address http://192.168.0.1, which should be the router address. You'll be prompted to enter the user (which is "admin"); leave the passed field blank (unless someone else have configured it differently). Now, run the wizard and you should be done. Additional configuration steps involve creation of WPA/WEP security in your WIFI network (usually, very relevant).

Hope it helps!