20 Most Recent D-Link DP-301U (790069251979) Print Server - Page 9 Questions & Answers

LAN cable or WiFi?

I hope i m not too late but for folks with the same problem here is an interesting link: http://masterpaiki.ru/goryachaya-shtuchka-d-link-ili-chinim-bp-jta0303e-e.html its in russian but the schematic is in english. Good luck and keep up the good work saving the environment from e-junk by fixing broken ones from parts of other broken ones! In my shop I have 5 I want to fix all! Ramanujan;

The WBR-2310 router has FOUR 'LAN' ports. Plug the baby-monitor into one of those ports.

Login to the router. Enter the current password. Use the router's web-interface to set a new password.

DSL-modems do not use PIN codes for WPS access, unless there is a PIN printed on the bottom of the device.

Use the "Add New Hardware" wizard to get Windows to detect the modem.

Ask the owner of the router for the SSID (name of the network) and the password.

Use an Ethernet cable to connect from the port on the DSL modem to the WAN/Internet port on the D-Link modem.

Reset it to the "factory" settings, and set a new password.

Some networks are configured to *NOT* respond to PING requests.

Windows XP is no longer supported (since April 2014). Replace/upgrade your computer, and your wireless adapter should be supported.

Have you telephoned MTS, and talked to their "Help Desk"?

See the D-Link web-site: www.dlink.com to see their product-line of "router" devices.

Just connect the AC power to the router, and connect your computer to one port on the router, and it should work.

Reset the router to "factory" settings. Then, set a new SSID and set a new password.

Reset the router to "factory" settings. Then, set a new SSID and a new password.