Sony DAV-SA30 System - Answered Questions & Fixed issues

There are iPhone cradles available that you set your Phone into, and I believe(don't hold be to it, as I haven't looked specifically for them) have RCA analog outputs, with charging available in the cradle. Have a look on Google. I'm sure you'll find hundreds of them. Those RCA cables, can plug into any high level(no phono inputs anymore) input, such as CD, DVD, TV, etc.

Without looking up this model number, it would appear that your amplifier has DC Offset(meaning a damaged amplifier). For more information, please visit my website at audioserviceclinic.com. Thank you.

Hello, Please get the code here : www.dvdoverseas.com/dvd.htm
www.regionfreedvd.net/

Regards, Jay__ij876h

Did something change in the configuration just prior to the onset of this problem?

The buzz - is it physically emanating from the unit or is it laid upon the audio through the speakers?

If the latter, look for signal cables running near power cables or devices with stong magnetic fields, look at track lighting use correlating with the problem.

I found transformer hum discussed here...

http://www.pechorin.com/m/2006/01/11/davsa30-252707.html

http://www.reviewcentre.com/reviews5213.html

http://www.amazon.co.uk/product-reviews/B00008XYJ7?pageNumber=2
Complained about the transformer failing.

I'd say that makes a trend. But I can't imagine why it would correlate to watching movies.

1.open tray with empty CD

2. press stop for 2 seconds

3. press 734466

4. on the screen region will appear press 0 for all regions

5. press ok to close then after open and insert your DVD.

What kind of system is it?
What "power thing" inside what?
It's a good chance its a ground loop issue.  Make sure the power cords aren't wrapped around each other or touching the speakers or running parallel with the speaker wires for more than a couple inches (interference transmitted into the speaker lines audible through speakers).

You probably popped a fuse in the unit..should be on the back of the amp.

you can play dvd through your telle,just run audio video cables OUT of dvd player,and IN to tv (av1),then turn telle to AV1,and wholla...

st1\:*{behavior:url(#default#ieooui) } Region Free Hack for LG DV340 DVD Player As I’m currently in South Africa visiting my family, I bought a DVD player as a prezzie for mom.
LG DV340 Region free hack for the model I bought at Game is below:
1, power on the player with no disk in the drive
2, pres pause on the remote
3, enter “314159′ on the remote
4, enter “0′ on the remote (0 = all regions, 1 = region 1 etc)
5, press pause on the remote
6, power the player off and then back.
Hopefully this helps someone else!
(Info from http://forums.dvd-swaps.co.uk/archive/index.php?t-2327.html)
Tags: dvd, lg dv340, region free hack

Hello,
Please download Instruction Manual of DAV-DZ260 from Sony Support and go to page 25 and select appropriate sound option.
The disc in player doesn't match with current sound selection thats why you hear muffled sound.
Thank you.

It sounds like the video out put has been set to S video,go into the hv-dx300a menu and look for the video or picture out put settings and set to VIDEO or RGB, rgb is the best if it works for you.

Hope this helps.

CABLE GUY.

to play discs from different regions on HTS3548:

Before you begin, ensure you have connected your DVD player to your TV and both have the power on. Once you have connected the TV, follow the instructions below.

-- Open the disc tray
-- On the remote control, press in sequence:
Disc Menu
Stop
7 3 4 4 6 6 0
OK
-- Make sure Region 0 is showing on the TV.

This should hopefully help!!!!

That is the system telling you it jhas shut down the amplifier circuit to protect itself from damage.
Check the speaker wires both at the back of the unit and at each of the speakers to see if any of them have come out or are touching anything they shouldn't be.

You may also have a blown speaker sending a short back down the line. So if you find no wires out of place, then disconnect each speaker and turn the unit off and on as you go until the message is not showing and sound is restored.

If you are in the UK then, for a genuine replacement see.
http://www.remotesrus.co.uk/remote/control/DAVSA30-Genuine_DAV-SA30.htm

Try doing a search on your local Ebay site - there should be someone selling one!

Please dont forget to rate!

me three

DO CHANNEL SETTING OR AUTO SCANNING THE PROBLEM WILL GO

Hi From the symptoms, you mentioned, ie playing CD's ok., Mpeg decoder chip is faulty. The new one supplied is a modified type. IC207, part no.6-707-406-01. Good luck. Capital98

Thats a strange problem.maybe your DVD lens wants to be cleaned try doing that.or try another DVD. if that do not work,then i can say that your player is not compatible with the program that your disc is burned with.

if you are trying to get rid of all the speakers & just hooking up the sound to the tv speakers, what you need to look for on the back of the dvd system is you need to find an audio out. I know the is one or two audio input, but I do not think there are any audio outputs. I don'e think you can get sound out of this system without your speakers hooked up. sorry.

Hi, I have exactly the same prob and I belive that it is in the amp module?! I am going to take mine in for repair as my other sony HT amp has just give up the ghost, (STR-DE435), it has a protector prob and is probably not worth repairing, although it is a great amp. If anyone knows the solution to this prob it would be great to hear it!!!

I had a simulair problem. Mine had the same problems and overheated it seemed. I still had warrenty on it, so I brought it back to the store. On the receit I got when they fixed it, it said that the analog audioprocessing unit had been replaced. That fixed the problem for me.