20 Most Recent
Danby DPAC8020 Air Conditioner - Page 4 Questions & Answers
Everstar mpm2-10cr-bb6 will not reset
Check the outlet that the unit is plugged into, to be sure that it is in fact, working. The circuit breaker in your home's circuit breaker panel for that outlet, may have tripped. Also, the outlet may have interior damage or a loose wire connection. If the unit seems not to be getting power, one of the above is the problem. Try plugging the unit into another outlet in a different room.
Hope this helps you troubleshoot and solve the problem.
How to use system as the dehumidifier. I lost the
The function of air conditioning IS the dehumidifier. It uses the process of refrigeration to condense water, like a water glass with ice cubes, pulls moisture from the air. The key is are you reheating the air somehow.
This is why the A/C is needed for defrost and defog in your car.
Just turn the unit on and monitor the collected water, emptying when needed.
Danby sac-8400 D coming up with e 1
Normal
0
MicrosoftInternetExplorer4
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
Hi,
Here is a tip that gives a further explanation of that E-1 code. The causes of
the E-1 code can be varied depending or the brand of your air conditioner.
Read through this tip... it will help you understand what is happening with
your window air conditioning unit and give you some things to try to help you
get your problem resolved.
E-1 Code on Window Air Conditioning Units
heatman101
P2 err on mpk-10cr
P2 error indicates that the spill reservoir in the base of the unit is full.<br />
<br />
Solution:<br />Move the unit to a location that is suitable for draining water from the unit. Remove the plug in the lower center of the back of the unit and allow the water to completely drain <br />(Remember to replace plug.)
I HAVE MODEL # MPK-10CR
Run the fan for 2 hours to evaporate the water that can build up with frequent usage and high humidity days. Also...I would check for blockage in the back line and the side bucket. You can always run weed eater line up to clear the blockage.
What is the P2 code on an everstar mpk 10cr1
<b>Unit Displays P1</b><br />
P1 error indicates that:<br />
<ol type="A">
<li>The water tank on the side of the unit is full.
<li>The water tank in not properly seated in the housing.
<li>The switch at the back of the water tank housing is not engaged or is loose </li></ol>
<br />
<i>Solution</i>:<br />
<ol type="A">
<li>Empty the water tank.
<li>Make sure the water tank is properly secured in the housing
<li>Remove the water tank for the housing and gently tilt the switch at the upper left hand corner of the housing towards you. This should allow the tab on the water tank cover to engage the switch. </li></ol>
<br />
<b>Unit Displays P2</b><br />
P2 error indicates that the spill reservoir in the base of the unit is full.<br />
<i>Solution</i>:<br />Move the unit to a location that is suitable for draining water from the unit.<br />Remove the plug in the lower center of the back of the unit and allow the water to completely drain <br />(Remember to replace plug.)<br />
<hr color="#cccccc" size="1" />
<b>Unit Does Not Cool/The Green Light is not on. </b><br />
Is the unit in the Cooling mode?<br />
<i>Solution</i>:<br />Press the mode button until cooling mode is selected. <br />Lower the temperature setting on the unit to the minimum setting. <br />(The temperature setting of the unit has to be lower that that of the room)<br />Wait 3 to five minutes for the compressor to start running.
Model No.MPK 10CR The red light says full. /and
Water bucket is full. Empty the bucket. If that doesn't work...then pull the little metal adjustment arm down so that the water bucket can make better contact with the water bucket. The level arm is inside the opening where the bucket arm goes in
I am a manager for
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man
Here is a download.It may require Adobe,not sure.It will need printing though.If it ends up costing money(which it doesn't suggest yet)but the web will be the web,just reply to this post ,I will get an auto email,and I will look for another.They are free all over the place,just some sites have you go through the motions,then when you want to download the question comes:Will you be using Visa or MasterCard? If you know what I mean. Good luck! Greg
Not finding what you are looking for?
