20 Most Recent
GE Advantium SCA1000H Convection / Microwave Oven - Page 4 Questions & Answers
My microwave ge space maker 1400xl will not work and or turned on please help !
If your GE Spacemaker XL 1400 microwave oven is not turning on, there are a few things you can do to diagnose the problem and try to remedy it. First, unplug the microwave oven and plug it back in again to supply power back to the oven after a power surge. Second, make sure the door is firmly shut as the oven does not operate unless the door is completely closed. Third, check the breaker box to make sure the switch associated with your microwave oven is not flipped to the "Off" position. Finally, press and hold the "Clear/Off" button on the front panel if the "Locked" message appears on the display. If none of these steps work, then the problem could be anything from a defective control circuit board or a burned out magnetron tube. Either fix is quite expensive and you'll have to evaluate the cost of repair versus the cost of replacing the microwave oven.
GE Model ADER40LNQ1 not working. We get a F2 code. We cleaned the filter. there is no reset button but we unplugged over night. Nothing seems to work
GE dehumidifiers use F2 to indicate a problem with one of several sensors. It's impossible to tell which sensor is the problem and they cost $30-50 each. Since the problem recurred after you unplugged the unit, the problem is a faulty sensor. Unless the unit is under warranty, it's cheaper to replace the dehumidifier. Since the other sensors will usually fail soon due to the moisture inside the dehumidifier, trying to replace one sensor at a time just extends the life of the unit for a relatively short time.
There are no parts lists or diagrams for the ADER40LNQ1 that I can find. If the unit is still covered by the manufacturer's warranty, then contact GE. They will provide a new unit if it is under a year old.
I hope this helps.
Cindy Wells
GE jnm1731dm1bb Microwave fuse is blown up as soon as I start the oven.
You have a dead short to ground. They are too dangerous to work inside them. There is a step up transformer capacitor with 120,000 volts stored in it waiting for you to come within a half inch if it. There is a heavy metal poisonous core in the magnetron and radiation to make you blind in about 6 to 8 seconds of exposure. Take it in for repair.
Not finding what you are looking for?