D-Link 802.11g Wireless Router WBR-1310 (WBR1310) - Answered Questions & Fixed issues

Should be an easy task, you would just need to go through the manual, the section which covers firmware update, it's explained quite well. If you don't have the manual with you, then just download one from the internet: D-Link DCS 932L PDF Manual Download

You should go to the dlink support web page to troubleshoot your problem. That message means that the link between your router and the internet is not working. Could be a physical or configuration issue.

Try resetting your router

hi baby *****

This site can walk you through the process.... https://portforward.com/d-link/wbr-1310/

Hi, Could be multiple reasons Check the signal type Play around with the Channel and see what connects better Check the server time out Ensure u dont have a limitation on number of IPs Connect without wifi password, change type if works Cheers Eddie

Ask the owner of the D-Link wireless router for the SSID (the name of the wireless network) and the password for that SSID.

This is a "discontinued" D-Link router. Older routers did not support the usage of a 'PIN'. Also, that model has a significant software problem -- it fails to work correctly after 31-DECEMBER-2013. So, recycle it, and buy a new router.

You need to log into the wireless router either by a computer that successfully connects wirelessly or by physically connecting with an ethernet cable. Once connected, log into the router by open a web browser (Internet Explorer, Mozilla Firefox, Google Chrome, Apple Safari), and typing the router's address (usually 192.168.1.1 or 192.168.0.1) into the Address (or URL) line. The default usernameand password is usually "admin" & "admin" or "admin" & "password". Once successfully logged in, look for a tab or link that says "Wireless" or "Security". You'll be able to change whether security is enabled or disabled, and the password associated with it. Your security options are WEP or WPA (or WPA-PSK). WPA-PSK is the most secure, but WEP is also an acceptable choice. Select the security option of your choice and either enter text into the passphrase generator or choose your own password and type it into one of the security key text fields. If you use a password that is not a plain english combination of letters and numbers, be sure to write it down so that you can enter it as needed on other wireless devices that need to access your router (ie-pda phones, game consoles, laptops, desktops, etc). Be sure to save changes so that the security settings and password is saved.
Let me know how you make out.

Looking for the Linksys WRT120N default password? You probably have little reason to access your router on a regular basis so don't feel too bad if you've forgotten the WRT120N default password.

However, when you're troubleshooting a network problem and need to get in to the device, the WRT120N default password suddenly becomes very important.

For most versions of the Linksys WRT120N, the default password is admin. As with most passwords, the WRT120N default password is case sensitive.

In addition to the WRT120N default password, you can also see the WRT120N default username and WRT120N default IP address in the table below.

Note: The Linksys WRT120N default password may be different for certain hardware orfirmware versions.

If I have that information, I'll include the exact WRT120N version number along with the correct default password. You can usually find your Linksys WRT120N version number on the bottom of the router.

Be sure to change the default router password on your WRT120N to something more secure as soon as you're in. Then use a free password manager so you'll never forget your new WRT120N password.Help! The WRT120N Default Password Doesn't Work!

At some point during the life of your particular Cisco Linksys WRT120N, the default password, username, and/or IP address might have been changed.

In most cases, if the Linksys WRT120N default IP address has been changed, the new IP address for the WRT120N will be the same as the default gateway IP address configured for your network connection.

See How To Find the Default Gateway IP Address for help.

In situations where the WRT120N default password or WRT120N default username has changed, you'll need to reset the Linksys WRT120N to factory defaults. You can usually do that via a special button or sequence of actions.

The WRT120N manual will have specific directions for performing a factory default reset. You can download the manual for the WRT120N from Linksys Support.

Please let me know if any of the WRT120N default login data below needs updated. For other questions about the WRT120N default information on this page, see my Default Password FAQ.WRT120N Default Password & Other Default Login DataVersionDefault UsernameDefault PasswordDefault IPPrivilegesAll[none]admin192.168.1.1Administrator

The WBR-1310 is just a router - you will also need a modem - the modem is the component that connects to your telephone line or to the cable providers cable - to get broadband into your home http://en.wikipedia.org/wiki/Modem you would connect the modem to this router in order to share your broadband service amoungst devices or to get wireless

once you reset your modem than the default username and password is usually "admin"

Follow this link to download stuff for you router. D-Link support page

Hi, You will have to reset it to a new one by using a hardware reset option at the back of router. Put in IP address of router in to your browser. Then it shall ask you for ID and password. Enter `Admin` or `admin` as ID and `Password` or `password` as password. You will see a web based setup opened in front of you. Go to the Wireless Lan settings and then you will SSID so change the SSID and this would be your network`s name. Then go to subsection security and select WPA2-PSK or simple WPA-PSK then enter your desired network key. Once done with all these things the click apply and reboot if prompted. Good Luck

Hi, By remote i suppose you mean your Wireless keyboard. if that is the case then simply log into your wireless router. All you need to do it to change your WiFi broadcasting channel. Go to WiFi or Wireless Lan setting and make sure that broadcasting is b/g/n mixed mode, then check what broadcasting channel is selected starting from 1 to 11/13, in case of extreme start or end make in middle like 6 or 7 and in case of any middle number like 6 to 8 make it either 10 or 3. By changing the broadcasting channel shall hopefully stop any interference with other frequencies. Good Luck

The CD is useless. Just use the IP 192.168.0.1 to get in. The username is "admin" and there is no password.Or you can go to the D-Link site for support

Press the Reset button on the router (use a tip of a pen or extended paper clip).Default URL: 192.168.0.1Default user name is: adminNo default passowrd. Leave blankSee details

You don't have to. Reset your router and follow the instructions from manual.Here is the manual for your router: D-link manual

Checked the instruction manual online. There's no INET light indicated. There's Power, Status, WAN, WLAN, and LAN LEDs. The WAN LED only indicates that the WAN port is connected to another device, e.g., cable or DSL modem. Check on your cable or DSL modem to see if the Internet light is on. If so, then you'll need to log into your router and go through the configuration/setup per the manual for your type of connection.

Bluetooth (BT) is not compatible with WiFi. There is no way to do that, and it must be done with or thru a PC, or laptop. The USB ports on wireless routers are for network storage, and/or network access to printers. Hope this helps