20 Most Recent
Sony BRAVIA KDL-40S2000 40 in. LCD HDTV - Page 4 Questions & Answers
Sony tv error communi 15
Back-light problem. Check and replace damaged component/s at its
back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
What causes no power KDL-40S2000
Fault with the main power supply regulator board.
Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and precious time.
Back light/inverter for KDL40S2000
Contact the authorized service center for Sony. With modern Sony models, the back light inverter is fitted inside the panel, and if you wish to access and replace it, you have to disassemble the panel. It is a very skilled work. Normally, if you contract Sony to service this kind of panels, they will advice you to replace the panel.
If the back-light inverter is fitted outside the panel, you can replace it; and can be bought from the authorized service center for Sony.
http://electronicshelponline.blogspot.com/
KDL-40S2000
Power supply regulator board [SMPS] fault. Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "
Mosaic" or "
Magazine" will make surf easy. Surf the site with patience. Pull up older posts.
Do asearch by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis.
Sony bravia lcd37m4000 schematic
Hi
Plz check your avi video cable socket (YELLOW IN COLOUR) - change the avi cables
If HDMI - unplug & Re-plug your HDMI Socket.
If using a HDMI Converter box - check whether the converter box is getting overheated - if so, buy a branded one (BELKIN is Preferable) & use the cables given in the pack. DONT USE THE OLD ONE
Code for resetting sony bravia
To make it a hard reset, just unplug the AC chord from AC mains wall socket, and re-plug it back after 15 minutes or so. This must make it a hard reset. If you wish to make it a system reset [Factory reset]; you have to enter its service mode option. If you wish to get some details; check the site linked here. Viewing it in "
Mosaic" or "
Magazine" will make surf easy. Pull up older posts. Surf the site with patience.
Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
Not finding what you are looking for?