20 Most Recent
Sony KDF-E50A10 50 in. LCD HDTV - Page 9 Questions & Answers
Picture only goes on for 1-2 seconds then goes
This also could mean that you need to replace the lamp. LCD displays have a lamp timer that when it reachs it max time it will not allow the unit to turn on till the lamp is replaced and the timer is reset. Check your manaul to see the proper proceedure to do this.
Screen is getting darker while brightness is
Your hdlp lamp is burning out. You need a new lamp. Look online for lamp by your model number. In instruction manual of tv it shows you how to change. Takes 20 minutes to change
Will a UK SONY KDF - E50A12U LCD Projection TV
In the United States we have one flavor of electrical power. That is 117 VAC (Volts Alternating Current) at a (alternating) signal of 60 Hz.
Hz stands for a man named Hertz who discovered the phenomena of frequency in the 19th century. It was originally was called "cycles per second" but has been renamed long ago.
The UK uses 220 VAC at 50 Hz which is a different flavor of electricity.
Since Sony (as do most manufacturers) produce sets for the differences in regional use your set simply won't work in the U.S. There are transformers available to convert 220 VAC to 120 VAC (Your set draws 210 Watts when it's on and 17 W when it's off. That means you need a fairly heavy duty transformer to make the change. Unfortunately because your set was set up to work with 50 Hz (it is branded as a British production set)
I wouldn't risk operating it at 60Hz which is the type the U.S. uses. Besides that your tuner is designed to receive a different format video than the United States uses.
Color dots on tv
u have a bad optical block , this part is very costly , but call sony costumer service , u tv maybe onder recall because of this problem
How do I find out which lamp is blown? My screen
It is dlp tv that has one lamp as back light source. Yellowish tint is problem of Optical Block Unit (commonly known as light engine) that will be replaced to fix it.
Local tech will help you in optical block unit replacement because it is purely job of qualified tech.
Thanks.
Red light flashing 7 times
Power supply board is dead.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
Sony KDL-52XBR9 power/standby LED blinking. TV
This is either your LCD backlight, inverter/power board or both. Neither of which are serviceable by the consumer, unless a visual inspection of the power board shows swollen or ruptured capacitors. This you can do yourself and is the most likely problem. Just read the side of the capacitor and go to radio shack, or online to find the right replacement capacitor. When re soldering be sure your negative and positive leads are in the correct holes.
I heard a loud
Power supply board is dead.Replaced this power supply board will fix this problems.Tries Shopjimmy.com,Ebay.com to to buy a refurbish power supply board for the replacement.
Have a sony kdf-e50a10 , tv would stay on for
Yes, its gets hot, try cleaning the fan blades,dust collects on the fins of it. damp paper towel will do, just wipe them off one by one, may have to replace it. Oh, be sure to unplug it from wall.....you can get parts from Mats Eletronics #1-800-628-1118.hope this helps
I hAVE A 50
Its a fault code saying your lamp is needing service or replacement. Is the tv working properly?
Not finding what you are looking for?