20 Most Recent HP Md6580n 65 in. HDTV - Page 4 Questions & Answers

0helpful
1answer

I have a HP TV RJ781AA. Yesterday, it stopped working while I was watching it. The orange power light comes on but no picture.

The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
9/11/2016 4:54:34 AM • HP Televison &... • Answered on Sep 11, 2016
0helpful
1answer

Forgot microsoft pasword

Reset it via the Microsoft website.
2/3/2016 1:10:51 AM • HP Televison &... • Answered on Feb 03, 2016
0helpful
1answer

How can you tell if your HDTV bulb is burnt out. It looks ok

When the TV is on, use a flashlight to shine on the screen. If you can see a picture it's the bulb or inverter. The screen will look similar to an old LCD calculator (grey, monochrome) when the flashlight is on it.
2/3/2016 1:01:42 AM • HP Televison &... • Answered on Feb 03, 2016
0helpful
2answers

I was using my hp pavilion dv6736nr inside during a lightning storm, suddenly everything went off and will not turn back on.

Motherboard fault. Contact the authorized service center.
11/27/2015 7:59:05 PM • HP Televison &... • Answered on Nov 27, 2015
0helpful
1answer

Is there a product available that will allow me to convert VHS to DVD using my HP desk top as the tool?

you will first need a video player,then a product called "video capture" will plug into the usb port and has the 3 video wires on it ( usually red,white and yellow). simply plug the vcr into them wires. heres a link to the type of capture device you will need. https://www.google.co.uk/search?q=video+capture+card&es_sm=122&source=lnms&tbm=isch&sa=X&ved=0CAgQ_AUoAmoVChMIusaljMyOyQIVgroUCh2KUwSj&biw=1366&bih=643#tbm=isch&q=usb+video+capture+card&imgrc=_ hope this helps
11/13/2015 11:53:37 PM • HP Televison &... • Answered on Nov 13, 2015
0helpful
1answer

Manual de servicio de la fuente de poder de computadora IBM Newvista hp m1854f3p

IBM NetVista Type 6838, 6848: Hardware Maintenance

download.lenovo.com/ibmdl/pub/pc/pccbbs/netvista/06p1790.pdf LenovoA description for this result is not available because of this site's robots.txt - learn more.

[PDF]Technical Information Manual A20 Type 6269 A40 Types ...

ps-2.kev009.com/pccbbs/netvista/a20a40tim.pdf
IBM. NetVista™. Technical Information Manual. A20 Type 6269. A40 Types 6568, 6578, 6648. A40p Types 6569, 6579, 6649 ...
11/1/2015 12:48:06 AM • HP Televison &... • Answered on Nov 01, 2015
0helpful
1answer

Why no relay clicking in plasma tv

Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
10/4/2015 8:20:18 AM • HP Televison &... • Answered on Oct 04, 2015
0helpful
1answer

Have a HP PL 5060N50 plasma HDTV and it turns on and stays on but has a dim blank screen. None of the buttons work on the television on the side.

Reset to factory default with your remote, that might sort the issues out. The buttons on a previous tv of ours could be locked so that the controls were only accessible through the remote control, this was to prevent anybody tampering with the settings. Maybe your tv is like this user manual at link below http://h10032.www1.hp.com/ctg/Manual/c00633133.pdf
6/18/2015 1:44:09 PM • HP Televison &... • Answered on Jun 18, 2015
0helpful
1answer

WHY DOES MY HP PLAMA TV HAVE RED TRACER LINES IN PICTURE

If you wish to get some details; visit the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Line, faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent.
6/6/2015 4:33:04 AM • HP Televison &... • Answered on Jun 06, 2015
0helpful
1answer

My hp flat screen tv turns with no picture just blue back ground with black lines thru it

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent
5/30/2015 5:39:55 AM • HP Televison &... • Answered on May 30, 2015
0helpful
2answers

Where do I get a remote for HP Pavillion cptoh-0506?

ebay or 1800remotes.com
5/28/2015 8:48:28 PM • HP Televison &... • Answered on May 28, 2015
0helpful
1answer

My HP high def plasma TV doesn't turn on, everytime I plug it in the power red light comes on when I click the button it doesn't turn on it either blinks or stay the same but the TV doesn't turn on.

Check and replace the damaged component/s at its main board. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
5/12/2015 3:20:48 AM • HP Televison &... • Answered on May 12, 2015
0helpful
1answer

HP 23xi. Half of the screen has a blue tint. I have already tried another screen and works fine. How do I fix it?

when you have an issue like that the only way to fix it would be to replace the lcd panel or replace the whole monitor. If it is still under warranty you should contact HP for a warranty replacement.
5/6/2015 1:10:32 AM • HP Televison &... • Answered on May 06, 2015
0helpful
1answer

What do I need to do to my hp 42inch plasma tv, it has no sound no picture . Is there something I need to look for ? I have not done anything to it Yet.

since you didn't include the model number I will just guess that you have no sound because you don't have it hooked to cable right now. As far as the picture goes, It's likely that either the power supply driving the sustain boards is faulty or one or more of the sustain boards is bad.
5/6/2015 12:58:30 AM • HP Televison &... • Answered on May 06, 2015
0helpful
1answer

We need to replace the remote to our genie intellicode 1/2 hp model h4000a. Does anyone know which remote belongs to the unit?

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Type in the "brand name only" of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.
3/10/2015 4:18:31 PM • HP Televison &... • Answered on Mar 10, 2015
Not finding what you are looking for?
HP Md6580n 65 in. HDTV Logo

38 questions posted

Ask a Question

Usually answered in minutes!

Top HP Televison & Video Experts

Brad Brown

Level 3 Expert

19187 Answers

 Mikey
Mikey

Level 3 Expert

6904 Answers

Stan Ford

Level 3 Expert

3131 Answers

Are you a HP Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Televison & Video

  • HP Televison & Video

Most Popular Question

buy

  • Televison & Video
Loading...