Sony PlayStation 2 Slimline Console - Page 2 - Answered Questions & Fixed issues
Cheats for the Lego movie ps3
https://www.google.com/search?q=Cheats+for+the+Lego+movie+ps3&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&channel=rcs
Not display
Checking yours AV cable is that possible broken ? Any sound when you connect on yours tv? If have sony welcome screen logo sound ,this mean motherboard output resolution chipset burn or dry join .well does not show up anything after changing AV cable ,it might be ram or CPU chipsets .
Lazer dose not light
This is the motherboard chipsets burn ,if you are not professional technical ,please send to work shop ,it could help
Broken power switch
Sometimes someone will have somethhing sticky on their fingers when they press the power reset button and cause it to glue in place. What you have to do is Remove the screw covers, and 6 screws from the bottom of the slim. These covers are square and one is under the warranty sticker. Tow of the rubber pad feet will remove to expose the screws. Use a knife to pry up the covers. Two of the rubber feet do not remove, they are the ones closest to the front. Open the case, and check to see if you can clean up the power switch button. It is attach to the top half. no problem getting the plastic top half wet when you clean it.
PS2 slim laser and disc motor don't work
I may not be the laser asembly or anything you described because absolutely nothing happened when you put a disc in. I may be a little switch at the very front of the drive right at the bottom right (near the power button) that may be damged or not being pressed by an piece of plastic on the same place on the lid. That switch recognises if the lid is closed or not so it know when to stop or start a disc. Try closing the lid harder or pushing more on that switch. hope that helps!
My sister dropped my ps2 and the power button got
My power button got jammed as well and I used a small flat head screwdriver to pop it out and it was fine. If that doesn't work you might want to tack it to a video game repair shop or try to open it and see if the button broke off and is keeping the button inside the system.
Mine does not work at all and I washed it
There are so many problems that can cause the ps2 to not work it may the power cord the power board if its a new version so try to find which of these have the problems and replace it if its a problem with the mother board then you may have to spend some dollars well you said you washed it? Well its quite disturbing to hear but try to give some heat to the console and take them to sonys repair shop if youre lucky it may survive so good luck
PS2 Slim Disc not spinning
I had the same problam and i fixed it. Open your disk lid, and at the back on the right there's a small white bit touching the disk. You can push it back and it will spring forward again. Get a tiny bit of tape and stick it back but make sure there is no tape near where the disk will spin. Free and worked for me.
Eek Playstation 2 Slim wont read any disc!!
OK. First of all, put any disc in and turn on the PS2. Push the spot shown here down with something about the size of the TV end of the AV cable.
http://i142.photobucket.com/albums/r96/Daiv_The_Goriya/Pushdown.jpg
Watch what it does. Does it stop spinning? If so, see this pic
http://i142.photobucket.com/albums/r96/Daiv_The_Goriya/PS2problem.jpg
- This keeps the disc from spinning when the cover is open.
- push this down while following the instructions from the first pic. Does the disc work?
- There's usually a small object that pushes #2 down. Chances are it broke off.
http://i142.photobucket.com/albums/r96/Daiv_The_Goriya/Missingpiece.jpg
This piece here is what broke off on my PS2 as seen in the previous image. If you can find some way to glue it back on, you should be back in business.
Not finding what you are looking for?