20 Most Recent
HP Compaq nx6110 PC Laptop - Page 6 Questions & Answers
How can i adjust the resolution on windows 7?
Hi,
Here's how you can adjust the resolution on your windows 7.
Start->Control Panel->Display
Under Display you have an option to adjust resolution, on the left pane of the window.
AnEspera
After alternating the notebook monitor
Hi,
I suggest try to load in BIOS check if the problem exist in BIOS, if it happens in BIOS most likely its a hardware,if not its a software, if its a software what i suggest try to reinstall the Operating System.
Vga draiver for window 7
Hi,
The VGA Adapter that is installed in this computer is
Intel 915GM. As it is, your
HP Compaq NX6110 was designed for Windows XP.
Even if your laptop's processor meets Windows 7 requirements, some of its components might not, as such your laptop's VGA Adapter. Intel so posted themselves that
Windows 7* drivers are not available for the following older Intel® graphics controllers. And one of them is your kind of VGA Adapter. You may double check this information from the HP Website through this
LINK.
I suggest you
downgrade your Windows 7 back to Windows XP so you can maximize its capability and use it as it was designed for.
I hope this works for you. Kindly reply/comment for further assistance. Good Luck!
Thanks for using Fixya!
Mongkey
DELL Tech ID #456563
TIPS: Is your computer slow? This might help
http://www.fixya.com/support/r8158906-diy_manual_pc_tune_up
(for Windows only)
I have a HP laptop and I forgot my password
You can remove or change the Windows User oradministrator's password. You need access to a computer with Internet access todownload the Hiren's Boot CD and burn it onto a CD.
Then insert this CD into the laptop/computer and boot upthe laptop/computer with the Hiren's CD and follow the instructions.
There are very useful utilities CD and it a Linux boot CDwhich contains quite a lot of Utility programs including a password removalprogram.
Click on one of these links todownload HIREN'S BOOTCD :-
http://www.hirensbootcd.net/
http://67.20.82.163/
I need compaq nx6110 bluetooth
Copy and paste it the the web browser. Or to Google tool bar, it will open up lots of pages for you. Just local the correct down load that you need.
Hp compaq nx6110 laptop usb
try other usb if same problem with other than go to device manager (controlPanel> System>Hardware> Device Manger) and delet all USB Contorollers from Universal Serial Bus Contorollers and restart your computer.
Cant access to my emails. sending and recieving
Turn off the pc. wait for five minutes. turn on the pc and just after 2 second start tapping on f8 keyboard which is in the top line of the keyboard.
you will get boot options.
use the arrow key and select safe mode with networking.
Boot to the dekstop and see the performance. If the performance is fine then most probably you security software is causing the issue. Update me with the result then i will provide you further steps.
No display
The problem is not new with this laptop.
The only way to get it repaired is to change its south bridge chip.
I just installed a new hard drive on my compaq
Dear Friend,
Your new hard drive doesn't have anything to do with the internet...In fact, if you are using wireless connectivity, you must pair with your wireless router.
The other solution will be to install missing drivers and, you can review them by right clicking on My Computer or Computer then, manage. There you would have to click on Devices located on your left panel and then you will have yellow triangles or yellow marks / ! \ meaning, that you have to reinstall them in order to make it work.
Recommendation: Use another computer, go to HP.com then support, when there look for your model number and select your operating system then download each drivers that are missing from your computer by using and external flash drive, then, take the flash drive to your laptop and install drivers.
Good Luck!!
A USB device has exceeded
If you get an error message"Insufficient power to operate USB device" when you plug a USB deviceinto the computer's USB port, then this device is drawing excessive currentthat the USB port cannot supply.
In case such as this, youneed to purchased a powered USB hub and connect this hub into the computer'sUSB port and then connect the USB device into this powered USB hub.
My compaq nx 6110 gives
Hello,
A disk controller failure can occur because of a few things:
A.) IDE or SATA controller failure.
or
B.) Hard drive failure.
Since this is a laptop, your most inexpensive troubleshooting and fix for this would be to test another ATA 5 hard drive in the machine. If you can successfully re-install Windows on it, the ATA/IDE controller is most likely fine and the issue is just with your hard drive.
Hard drives are easily replaced... controllers are not and would require a new motherboard.
Please let me know if I can assist you further.
Regards,
KYTechnology
Not finding what you are looking for?