20 Most Recent Hobart 29 in. AM15-1 Free-Standing Dishwasher - Page 5 Questions & Answers

1. Clogged drain line: The drain line may be clogged with food debris or other debris, causing the water to back up in the machine.
2. Blocked sump: The sump, which is where the water drains into, may be blocked with food debris or other debris, causing the water to back up in the machine.
3. Faulty fill valve: The fill valve may be faulty, causing the water to fill beyond the normal level.
4. Leaking pump or hoses: The pump or hoses may be leaking, causing water to collect under the machine.
5. Broken float switch: The float switch, which is responsible for controlling the water level, may be broken, causing the water level to rise uncontrollably.

It is recommended to have a certified Hobart technician or a professional commercial dishwasher repair service diagnose and repair the issue

Error code E3 on a Hobart LXiH sanitizer/dishwasher typically indicates a problem with the water fill system. Here are a few things you can check to troubleshoot and resolve this issue:

1. Water supply: Make sure that the water supply to the dishwasher is turned on and that there is adequate water pressure. Check for any kinks or blockages in the water supply line.
2. Water inlet valve: The water inlet valve controls the flow of water into the dishwasher. Check to see if the valve is open and that there is no debris blocking the inlet. If the valve is faulty, it will need to be replaced.
3. Water level sensor: The water level sensor is responsible for detecting the water level in the dishwasher. If the sensor is not working properly, it can cause the dishwasher to display an E3 error code. Check the sensor for any signs of damage or debris.
4. Water pump: The water pump is responsible for pumping water into the dishwasher. If the pump is not working properly, it can cause the dishwasher to display an E3 error code. Check the pump for any signs of damage or debris.
5. Control board: The control board manages all the electrical functions of the dishwasher. If the control board is faulty, it can cause the dishwasher to display an E3 error code. In this case, the control board will need to be replaced.

What is the fault you are trying to reset? Hobart dishwashers don't have a reset button, they reset themselves when the fault have cleared

This is the resource for Hobart Documents in the country you reside. There are many variations. https://www.hobart-export.com/support/documents-download https://www.google.com/search?q=hobart+h62+dishwasher+wiring+diagram ...

'reset'. It is a dishwasher, not a computer or cellphone. It has an electro-mechanical timer. Service Manual for a similar model. ECOMAX 602/612/ https://www.google.com/search?q=Hobart+Ecomax+652+reset ..

Question edited for clarity. Question moved from Cars and Trucks. The isn't much inside them. It looks like the clutch is magnetic? http://www.hobart.co.kr/data_file/C44AOPTIRINSE704.pdf https://www.google.com/search?q=hobart+c44a+dishwasher+conveyor+clutch ..

Hi, you would need to get a special code/programming manual from the manufacturer or a company that services a dishwasher of your brand. Because they usually ch arge for their services, they might not be willing to email you this manual, but I would still try. Thank you.

defective temp sensor

On this machine it is a Booster Fill Error. https://cdn2.webdamdb.com/md_a4aE6NOBgD12.jpg.pdf?1558013512 Not much else on it. https://www.google.com/search?q=Hobart+fx-90a+code+18 ..

Yes the extraction fan has failed.

Anyone who doses manually needs their heads looking at unless they only do one wash a day! :>D

LXi SERIES DISHWASHER - Hobart

https://www.hobart.com.mx > pdf > ManualOper PDF The Operator Programming mode allows changes to be made from factory settings to the chemical pumps' operation. This includes the Detergent and Rinse Aid pumps, ... 24 pages

Hobart LX18 User Manual - Page 1 of 28 ' Manualsbrain.com

https://manualsbrain.com > ... > LX18 > User Manual Page 19MANAGER PROGRAMMING (Machine Must Be In READY Mode) To enter the Manager Programming Mode, you must first enter the Operator... Page 20PROGRAMMABLE ...

How do you check the programming on a Hobart Lx18h

https://www.justanswer.com > ... > Appliance Repair Dec 5, 2018 - How do you check the programming on a Hobart Lx18h dishwasher,,how do I get into programming to check booster heat. 1 answer · Top answer: To complete this transaction, please click the five stars at the top right of your screen ...

People also ask

The most obvious is that quality matters. Always buy OEM parts from Hobart and not copies from China sold by eBay or Amazon. One further off the wall thought, running a 200v element on 220v power? If the element is right for the voltage, it can't be over run. The machine is advertised as 'wide voltage' AM15 DISHWASHER TECHNICAL MANUAL 208-240V/60/3. It has a 5 KW element and voltage specs from 200 volts to 415 3 phase depending on model. https://www.partstown.ca/modelManual/HOB-AM15T_spm.pdf From your description of distorted, bent and flaking, certainly suggests is has been used dry. This is an interesting unanswered question. Contactor not shutting power straight way? https://www.fixya.com/support/t27293682-heater_element_in_hobart_dishwasher 50 year career in catering kitchens, I have seen all the abuse staff treat machines, and all the things that can go wrong. https://www.google.com/search?q=hobart+am15+burning+elements ..

Apart from doing a power reset, the only thing you can do is call for service. All these machines are controlled by computers and diagnosed by them when the service engineer brings his laptop.

I can't imagine a bad relay board would blow a fuse. The relay board would need to make a bad connection to ground to blow a fuse -- I don't see it.

If you could supply me with the ML#, I'll take a look at the wiring diagram and give you an educated answer.

Not that I recall clearly which fuse is for the drain solenoid, but the two sound related. If a drain valve is obstructed by debris, it will heat up the coil and short it out. I don't know the spec'd ohms, but I would suspect at least 50. I'd check it.

This is a low temperature machine. So detegent and sanitizer go in together and the rinse aid goes in at the rinse cycle. At the lines in the right containers. It is pulling sanitizer at the rinse cycle? Page 11 of the manual leads me to belive it may be priming. Do you have non return valves in the lines of all the product? Your lines should be full of chemical all the time with no air spaces. https://www.hobart.com.mx/pdf/ManualOper/F38404%20man.pdf Your detergent supplier, Hobart, Ecolab, Diversey will often help with issues like this for no charge. Don't let them play with metering though. That is an old trick to get the salemen more sales. ;>) ..

The instructions should tell you if the dishwasher is auto fed detergent. https://www.hobart.com.mx/pdf/ManualOper/F34779.pdfThe detergent is auto fed from the 5 gallon buckets purchased Separately

Water inlet valve or level sensor faulty.