Top 20
Sony VPL-ES3 Multimedia Projector Questions & Answers
Sony vpl es7
Check the lamp first
We supply original projector lamp,bulb,parts,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry,Lampdeng Limited
How to reset password in
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 13.0px Arial}
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 22.0px Times}
You must contact sony because this particular model is a business projector and only sony can give you the reset code for that particular one. Here is the quote from the sony manual. "If you call the customer service center because you have forgotten the password, you will need to be able to verify the projector's serial number and your identity. (This process may differ in other countries/regions.) Once your identity has been confirmed, we will provide you with the password."
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 8.4px Times}
My vpl-es3 picture is not
is the lens focused properly.
is the DOT Phase on the input setting correct.
is there condensation on the lens.
what sort of fuzzy do you see. is it all over the whole screen. is it coloured or only one colour.
is the screen resolution matched to the video source
I have a sony projector
Looking at your projector I can see that it is a popular model. Depending on where you live you should be able to find them on ebay quite cheaply, probably for around £30. You could then take the power supply from the one you buy off of ebay and swap it to your unit, or depending on what is wrong with the one from ebay you may be able to swap your bulb to that one and again have a fully working cheap projector.
I hope this helps and thank you for using FixYa
How to reset lamp counter in Sony-VPL-ES3
Hi,
To reset lamp timer in Sony VPL-ES3,
Press following keys on the remote control in following order for less than 5 seconds each,
RESET, <<, >>, ENTER
This will reset lamp timer.
Tel me plz the default service mode
Hi there. To Service Mode in SONY VPL-ES3 is, ENTER-ENTER-LEFT-ENTER. watch out!!!, Don't change anything if You don't know what are You doing.
Sony VPL-ES3 Multimedia
Hi Marsat!
Actually both the filter cover and lamp covers have a long straight plastic part which is inserted in small hole. At the end of the holes are micro switches. When you fit the filter cover this switch is pressed and projector knows that it is ok to turn on. Similarly if lamp cover is loose the micro switch is not fully pressed resulting in this message. Tightening it presses the micro swith and the indication vanishes. In your case if plastic parts are intact, lamp cover screw is fully tight, filter is clean and properly seated with a click sound, then may be some micro switch has malfunctioned and you have no option but to take the projector to some qualified repariman.
Regards
Raheel
Sony LCD Projector
NOT HAVING REMOTE??...INTRESTING...
HAVE YOU TRIED IT MANUALLY TO TURN IT ON??
Help with Sony VPL-ES3 Focus problem
ey mann.sorry for my english ok.im from to argentina and i have the some problem with the cover-lamp.i try the six step for try a find a solution,but not working.the lamp try to star two oportunities but put in cover lamp again.you can help me please? thanks.b
Not finding what you are looking for?