Top 20 D-Link DCS-6620 Network Camera - Page 2 Questions & Answers

https://www.youtube.com/watch?v=zKeXtyUMKjA Check out this video it might help you with your issue.

Goto this link might help you out. https://www.google.com/search?q=How+to+change+WiFi+password%2C+D-link&rlz=1C1AVFC_enGB797GB798&oq=How+to+change++WiFi+password%2C+D-link&aqs=chrome..69i57j0l5.13266j0j9&sourceid=chrome&ie=UTF-8

you have to try turning the hole lot off and restarting it i had this problem with putting mine and same with printers good luck should work

Should be able to hook it up to your computer with hard wire and put it in if you don't hook it up that way it won't work

Hi, you need to log into your D-link router and then you van change your wifi password. in case you need any help mail me on [email protected]

Without providing a model number I can't be specific. Usually it is admin, admin or admin and no password.

You need to log into the router using either //router, routerlogin.net. or the IP address which is by default, 192.158.1.1 or 192.168.0.1 Default passwords can be found on the companies website, but many use admin and password

There is a rest port on all drinks. You need a paperclip ir something similar to depress.hold down for a count I 5 5 1000 s and then lights will blink and reset.

How do I log into my D Link wireless router?

• Open up a Web browser.

• Type the address "http://192.168.0.1" or "http://dlinkrouter" (omit the quotes) into the browser's address bar, and then press "Enter."

• Log in to the D-Link router with the administrator username and password.
• The default username is Admin and the password is blank (nothing).

Do a reset back to factory defaults. Hold the button down in the pin hole for 30 secs.

Why do you use g only? It's slow.

When you change the device, you usually need to contact your ISP and they will make the change.

do you have a good internet connection?

Hi! this is Alex Walker expert to help you for this issue call me on +1(518)348-9393 I will be glad to assist you Thank You

Hello VAMM I can help you in that case but you need to explain more. So whenever you have time just call on +1 (833) 493-0111 (toll-free) number.Cheers,John

Try an external usb wi fi adapter and see if that works - if so, then your initial diagnosis is correct.

I attempted to use D-link equipment TWICE in the past... I went as far as wasting a net of 3 hours each time with their "TECHNICAL" support... OVER & over... to the definition of insanity... Had anything worked I would tell you ABOUT IT. I would strongly recommend you return them from WHERE-EVER you purchased them... NOW. My next was a single unit NETGEAR... Cost less and I had cable connected my video server WIRELESSLY... in a matter of minutes. My OPINION: Avoid the pain. Carnac the Magnificent

go to dos prompt in a windows pc and type in ipconfig and press the enter key to find the default gateway address it might be 10.0.0.1 or 192.168.0.1 these are the most common. Type the ip address into internet browser to log into the gateway router. There will be an admin user name and admin password. It might be the default or it might be written hopefully on the router case/ try Username: cusadmin Password: password IP Address: 192.168.0.1 http://www.cleancss.com/router-default/SMC/SMC8014WG if you get into it look up wi fi security to find out the wep key or wpa key

Can you access msn.com via command prompt?

Hi, Check the link below ftp://support.dlink.co.in/pdfs/products/DSL-1504G/DSL-1504G_ds.pdf