20 Most Recent HP Compaq d530 SFF PC Desktop - Page 4 Questions & Answers

If you are refering to the CMOS battery, Open the case, look for a button battery, remove and replace. Take a look at HP support: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph04375&lc=en&cc=us&product=94878

The most common reason a computer won't start can be a piece of hardware has failed or is causing a problem but that hardware isn't usually a hard drive, the part of your computer that stores all of your files. To fix such kinds of issue, you can take the following steps.1.create a bootable usb or cd ,there are kinds of software for you to complete this step, you can choose Fix Boot,EasyBootDisk or Windows Boot Genius. I suggest you to use Windows Boot Genius, it is easier and more effective.2.boot your computer from the created disk3.fix the issue after run the softwareBy the way, before any further steps you should make sure the power supply is good. Any hardware issues such as pc power and cable,motherboard corrupted should be troubleshooted.I don't suggest you to try the solution above until you are sure there is nothing to do with the hardware. source:http://windows-8-password-recovery.com/computer-wont-boot.html

Click start right click on computer select properties then device manager scroll to sound and video game controllers if you see a yellow question/exclamation mark or a red X the driver will need to update drivers. Click start right click on computer select properties then device manager scroll to sound and video if you right click on sound and video then on high definition audio device select update driver software. Click start control panel hardware and sound manage audio devices right click on your speaker select configure speakers. Right click on the speaker icon in the bottom taskbar you will see an array of options select playback devices make sure it has a green tick and the correct speakers are selected be updated if you computer came with a motherboard disk the drivers could be on it although once speakers are connected widows 7 should automatically update the drivers. Click start control panel hardware and sound manage audio devices playback you might have to set a default go for via high definition audio then right click on speaker. You might have to configure them then select properties you will see tabs general level in this tab make sure your settings are loud enough also enhancements and advanced from the drop down list in the advanced tab select dvd quality or another then apply Hope this helps.

http://www.manualshark.org/manualshark/files/28/pdf_28308.pdf

type this site http://support.amd.com/us/gpudownload/Pages/radeon-prer300-xp.aspx install driver then setup it

why would you want to do that?

1) Restart your PC

2) Logon and wait for the black screen to appear

3) Make sure your PC should be able to connect to the internet (black screen does not appear to affect this)

4) Press the CTRL, ALT and DEL keys simultaneously

5) When prompted, Click Start Task Manager

6) In Task Manager Click on the Application Tab

7) Next Click New Task

8) Now enter the command:

"C:\Program Files\Internet Explorer\iexplore.exe" "http://info.prevx.com/download.asp?GRAB=BLACKSCREENFIX"

Note this command assumes that you are using internet explorer as your browser, if not substitute your browser path and file details for those of iexplore.exe or use the Browser option of Task manager to locate it.

9) Click OK and your browser should start up and begin the download process

10) When prompted for the download Click run, the black screen fix program will download and run to automatically fix the issue.

11) Now restart your PC and the black screen problem will hopefully be gone

Diagnosing problems with your computer can be difficult, especially if you do not have any visual cues to guide you.

Fortunately, computer makers, like Hewlett Packard, make the job easier by using beep codes that computer owners can use to determine the source of the problem.

By carefully listening to these beeps, computer owners can find the malfunctioning piece of hardware and resolve the issue.

Look for the user guide that came with your computer.

Having the user guide available will make it easier to track the meaning of the beep codes.

Most HP user guides have a section covering the various beeping patterns and what each one means.

Start your computer and carefully listen to the beeping.

HP computers use both long and short beeps, so listen carefully to determine whether each beep is short or long.

Shut down your computer and restart it.

Listen again to the beep codes to be sure which pattern you are hearing.

Write down the beep pattern and compare it to the beeping patterns listed in your HP user guide.

Restart your computer again and look for any messages on the screen.

Depending on the nature of your problem you might see visual clues, or the screen might remain blank.

Check the status of the LED lights on the front of your HP computer as it is starting up and giving its beep codes.

For instance, a red LED light often indicates a faulty memory module or an overheating processor.

WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL.

http://www.kitchentablecomputers.com/static.php - rules

make sure that your RAM modules and Cmos battery are securely seated

on some motherboards Cmos batteries are soldered in

Test all power and data leads that attach from motherboard to your hard drive IDE SATA

make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty

if its a flat 40 pin ide it will be the first to fail

check the graphics card is seated properly with no dust in the socket you might have to remove it to check for dust reinstall it

restart your computer the found new hardware wizard should activate

a computer needs power and data to travel through every working device and to its continue its cycle and to have and end to function make sure all leads that are attached to your drives dvd\cd and floppy drive have secure make sure the connections and are not faulty or just replace them they could be faulty a computer needs all electric current and computer data to travel to and through every working device and have an end to work properly so any faulty leads will end up with a computer error also check the keyboard for secure dust free connection ps2 and or usb also check the CPU central processing unit for secure dust free seating and thermal paste

http://www.hardwaresecrets.com/article/Thermal-Compound-Roundup-February-2012/1490hope this helps

I found the drivers I needed at http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=316715&lang=en&cc=us&prodTypeId=12454&prodSeriesId=316713&taskId=135

I am running XP and used SoundMax Integrated Digital Audio for audio &
Intel Graphics Driver for Microsoft Windows 2000/XP for video.

if you hard drive is o.k. reformat system and reload windows o.s. that cam with your computer

Hi, To remove this error, you have to download and install the followingHP COMPAQ D530 SFF Microcode UpdateDownload the update from the above link. Read / follow the instructions carefully. This package contains a utility that can be used to install or upgrade the processor microcode on the listed HP Compaq Business Desktop D530. Hope it helps! Good Luck!CreativeTECH

Drivers are located here: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=316715&lang=en&cc=us&prodTypeId=12454&prodSeriesId=316713&taskId=135

You must select the appropriate operating system for your application

If you changed the ram and still have the problem, is the ram socket.In this case you can change main board.

Don't put tape on it. Just buy a replacement fan from somewhere like this:http://www.newegg.com/Store/SubCategory.aspx?SubCategory=573&name=Case-Fans

HP Compaq d530 SFF Drivers

Let me know if any further clarification/ assistance is required.

Good Luck!
Appreciate generously, if the solution could have been of any help!
CreativeTECH

if you are referring to troubleshooting your cd romClick start control panel administration tools computer management device manager scroll down cd-dvd rom drives you might see a yellow question /exclamation mark ? ! or a red X right click to update driver you might have to physically unplug the leads for this cd/dvd restart your computer then plug them back this should activate the found new hardware wizard if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

if this fails to fix the problemIt could be a problem with the lens you could use a liquid type lens cleaner place 2-3 drops on top of a cd/dvd then run it

Reboot your computer... That will clear it up for sure... You accidentally tried to start it twice...