20 Most Recent HP Laser Jet 1320 Printer Questions & Answers

Hi downward_man,

Here's the instruction on how you will install your HP Laser Jet 1320 Printer:


1. Access the HP hardware support site to retrieve the HP LaserJet 1320 driver download.

2. Click the link that represents your computer's operating system.

3. Scroll down the page, and click the "Download" action, below the "Driver - Universal Print Driver" table. Opt to save the driver, as the download file has the setup application that is needed to install it.
4. Double-click the setup application's icon from its new file location on your hard drive. The HP installation application will open automatically.
5. Click "Next" to proceed to the first installation steps.
6.Select all of the HP recommended installation options, and click "Next" to begin copying the driver's files and components to the computer.
7. When the HP installation wizard asks, plug the HP LaserJet 1320 USB sync cable to the USB port, located on the back of the printer hardware. Connect the other end of the cable to an open USB port on your computer.

8. Click "Finish" to complete and conclude the HP LaserJet 1320 series driver installation process.
Hope it helps.

Thank you for using FixYa.

the feeding tray having foreign materials sruck the paper loading

Does the lines repeat in a rythim. If so you need to replace the cartridge because the drum is broken or it doesnt make a good contact with the machine.

You may download the HP driver and software from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?cc=us&prodNameId=410624&prodSeriesId=410622&swLang=8&taskId=135&swEnvOID=228

please describe the more the problem so can gave accurate solution

when i print why my printer prints white ?

Just install Postcript Driver for Hp LJ 1320 in your PC.
Available in Hp Page.

You probably have a small obstruction under the registration assembly or the actual rollers of the registration assembly are out of position. I have had this before. Lift the metal flap with the green lifter on the right hand side, up and check for paper and if it is in the right position. Also make sure that the paper guides in the paper tray are snug up against the paper.

This error is most often caused by either a bent contact in the printer or a bad chip on the cartridge. If you still have your old cartridge, reinstall it to see if the error persists. If it does then there is a problem with the printer. If the other cartridge works then it is likely a bad chip. If this was a new OEM HP cartridge it should be covered under their warranty. If third party, take it back to the vendor and get them to replace the chip.

you need to have administrator priviledges

Hi

Does print is faded or it prints clear? If faded, just get your cartridge and shake it well to distribute evenly the toner. If prints clear, preview it first before printing and maybe the other print area you want is not included when printing. Just set the print area.

It is a pretty easy task to install the drivers again.
1. You have to download the drivers for your Operating System (the Windows you are using e.g. Windows XP). Click here to download the drivers for your version of Windows.
2. Double click the driver installer and follow the instructions.
This will install the Printer drivers print the test page (make sure you connect the printer to yout system)

Let me know if any further clarification is required. Dont forget to rate the solution if it has helped you!!
CreativeTECH

Flip the tray over, there is a little pawl there that locks it down to insert it (In the center, near the front), it is held in place by a spring and often that spring pops out.

Try an nvram, hold down the right arrow and the cancel button while the printer is off and turn it back on, this will reset the sensors, and reboot the machine. Hold the down button and cancel until permanent storage is displayed and let go of the buttons, if this doesnt work it is more lilkely to be the cartridge tray and by replacing the tray the issue should be resolved.

Al

Not recommended, to safe your printer