20 Most Recent
HP DeskJet 1280 InkJet Printer - Page 6 Questions & Answers
I have the problem w/
Fast draft is designed to save ink and results in lower quality output. That is by design.
To obtain the best output, I suggest that you raise the quality of the printouts.
My printer will not print on A3, evn though it is
You need to open your "control panel" and from there to open "printer and faxes".After you open those, look for advance settings where you can say to the printer that the paper is A3 format, beacuase the default format of the printer i set to A4.Plase replay if you need any other help.Thanky for using Fixya!
On my HP 1280 Deskjet
printer hardware problem.its for formatting board problem.it is located on carriage assymbly.replace the board.problem will solve.
There is no power in
It is a problem with printer power card or other hardware problem.You can checked it by service center.
My print test prints fine but I cannot print any
Make sure your printer is the default printer to do this go to control panel printers and hardware then printers and faxes right click your printer and set as default you my be printing as a microsoft xps document
Hp deskjet 1280 driver
You can get all drivers and install software for free, go to HP.com and click on downloads and drivers. select the correct OS and you should be good to go.
There has been issues with older printers and newer Operating Systems, not all old printers work with new systems....
I HAVE A HP 1280
hai first go in printer properties then basic in basic there is option advanced in advanced there is check in left bottom unmark the check n apply ok
Not finding what you are looking for?