20 Most Recent
HP LaserJet 3050 All-In-One Printer - Page 4 Questions & Answers
My wireless printer hp deskjet
if the wireless blue light is blinking, it means it's not connected to the router or it's not communicating with it.If wireless blue light is solid ,it means it's connected to the network.
you will need to reconnect the printer to the network by using a USB cable.it will configure the wireless connection.
- to start the installation ,click on the start button on the computer
- click on programs or all programs depending on the operating system on the computer
- look for the HP folder and then left-click on it
- inside the HP folder,left-click on DESKJET 3050a or DESKJET 3050 series
- inside the DESKJET 3050 folder, left-click on product setup and software
- left-click on connect a new printer
- it will open up a page with options on how to connect the printer
- select wireless and then hit next
- if you are prompted to connect the usb ,please connect it
- if it asks you whether printer is connected to the network,select no
- click on next
- if usb is already plugged in,tick the box that says it's already plugged in
- hit next
- wait for the prompt to unplug the cable
- try printing wirelessly
let me know if these steps do not solve your problem.
Avery labels stuck
your going to have to take it all out and peal all the bits of stuck label out manually, if you have some alcohol maybe gin, give it a clean too, the sticky will pass on to the rollers and make a mess of everything, if its an inkjet then you may have to use damp cotton to clean the ink units, good luck.
Hp 3050 power button quit functioning; cannot press it down. Is this self reparable?
To fix the power button, which is stuck down or does not spring back up....remove the panel which has the all the buttons and the power button, the panel does not have any screws to remove, you got the pull it out from the lower side and move slowly towards the top. Once the panel is free, you will see that the power button is connected with a small plastic connector which would be broken, fix the broken piece or get a new piece and the problem is fixed........
Need to figure out how to change my hp laserjet
Two ways to change the language:Through System:Start >All programs>HP laserjet30xx>Tool Box>System settings>System setup>Language>English..Through Printer control panel:1. Turn off the all-in-one.2. Press and hold down the Star and Arrow buttons.3. Continue to hold down the buttons while you turn on the all-in-one. Hold the buttons throughout the entire power-on sequence.4. When Permanent Storage Init. appears on the control-panel display, release the buttons.5. Select Language,set date & time(But you may loose storage data)
Not initializing
this is common problem in this printer is , due to logic board problem the printer is not initilize.
Not finding what you are looking for?