20 Most Recent HP Deskjet 460c InkJet Printer Questions & Answers

I have the same problem,only pick up some of the paper and then stop.

Power On and Connect the printer to pc and try to update windows it will take little time and your printer driver will show in optional or important update select that and install after install restart the pc the printer is ready to print

u have a lot programs for Drivers but for me the most effective was 1. DRP ( Driver Pack Solution 12 - search for full version with torrent) 2. my favourite ( http://www.driveridentifier.com/) respect !

PLS SPECIFI THE PROBLEM DETAILSPRINTING DRIVERSPRINT QUALITYCATRIDGE ERRORWHAT PROBLEM YOU GET

1. there is a sensor at the end of the printer which shows paper jam recovery. the sensor of your printer may be jammed. clear the jam and it will work. 2. if not, there may be a small piece of paper near the sensor of your printer. clear it.

Hi

This is a problem with the ink cartridge. Maybe your cartridge is bad and needs to be replaced. But because the carriage is not moving you can turn off the printer and try to move it with hand it should move now. Once out of place try to remove both the cartridges and turn on the printer. Now when it says error then open the cover and the carriage will move to center and you can install the cartridges back in the printer and try.

RATE MY SOLUTION

Talk to HP.

Probably they won't give to you.

Considering business confidentiality, well, it won't be easy..

I do believe that this website here has the step-by-step directions needed.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=125&prodSeriesId=3434453&prodTypeId=18972&objectID=c01462596

did you try HP Support & Drivers

is the cover fully closed?
Best regards
Ck

Please install new driver and get it downloaded here : www.siliconguide.com > Drivers > Printer > HP
www.opendrivers.com/.../hp-free-driver-download.html
www.brothersoft.com/downloads/hp-printer-driver.html
Jay bnvmpyt

There is a switch at the bottom of the paper feeder. Check if the switch has been properly set. It will stop the blinking of the paper out.

A Non-HP Toner Cartridge installed error message occurs in the following situations:

• Non-HP cartridge is installed
• HP cartridge is not installed correctly
• False error
• Sensor issue (hardware)

SOLUTION: The Non-HP Toner Cartridge installed error message could be cleared completing the following steps: All HP toner cartridges carry the Hewlett-Packard logo, and meet HP's high quality standards. 1. Verify that you are using a legitimate HP toner cartridge by going to the HP LaserJet and Color LaserJet Printers - Counterfeit Print Cartridges webpage. Click here to go to the HP LaserJet and Color LaserJet Printers - Counterfeit Print Cartridges webpage (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl01270) . 2. Remove the toner cartridges, clean the metallic contacts by a dry linen cloth, and then reseat the toner cartridge, and check if the error occurs. To reseat the toner cartridge, see the instructions at the HP Color LaserJet 2600n Printer - Changing Print Cartridges webpage. Click here to view the HP Color LaserJet 2600n Printer - Changing Print Cartridges webpage (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00314345) . 3. If the issue persists, perform a firmware upgrade from the Download drivers and software page at www.hp.com. 4. Restore the factory defaults in order to restore the default settings: a. Use the left arrow or the right arrow button to select Service , and then press SELECT . b. Use the left arrow or the right arrow button to select Restore defaults , and then press SELECT . If the issue still persists, even after completing the troubleshooting steps provided, then use one of the following support options so that HP can work with you to resolve the issue, because it may be related to printer hardware where it needs a live interaction