Top 20 HP PSC 1410 All-In-One InkJet Printer - Page 3 Questions & Answers

You could download the drivers to a flash drive from this link:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=436433&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=436453

then install it on your computer.. Let me know if this solved the problem and good luck..

lost the cd of my hp psc 1410 all-in-one ink jet printer

Go to this HP link and select your OS for the drivers/software:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=458978

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

try to align the printer heads, here how first you on the unit it print sample pages then face it on the scanner face down press the button scan wait till the power light stop blink then try to print again

Unable to proceed scan documents after 2/3 pages in - HP PSC 1410 All-in-One which i intend to save in pdf file.

Hi

Correct you have to replace the cartridge(s) but still try to clean the contacts of cartridge and the contacts in the carriage to try. Normally when you re-fill the ink is spilled. Clean it with a tissue paper or a clean thin cotton cloth.

Access the manufacturer's web-site: http://support.hp.com
and enter the model-number, and do the search.
You'll find the device-drivers available for download for your All-In-One.
Download.
Install.
Print a test-page.

download from the following site

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=458978#N193

Please remove all cartridges. Using a moist cloth clean the golden contacts on cartridge as well as printer. DO NOT touch nozzle of cartridge. Dont insert the cartridge yet.

Please do this :
1. Remove the power cable from printer. Remove the USB cable that connects printer to computer (remove it from printer as well as computer's usb port)
2. Press the printer power button and keep pressed for 3 minutes then release
3. Now plug in the power cable and usb cable (connect printer to computer) and power on the printer.

Now insert cartridges and see if error goes away.

You can also click the link below for any future troubleshooting with the printer. It's a self help guide.

Click Here

Regards,
Shrey

P.S. If this did not help, please let me know and will be glad to help you further.

First are you trying to scan using the scan button on the all-in-one or from the computer? If you are trying to use the scan buttons, you need to install the HP full-feature software package: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=458978#N193 . (If you need to expand the section marked drivers.) Uninstall the printer and disconnect the data cable before installing this full software.

If you installed the basic drivers that came with the Mac OS, you can scan using Apple Preview and Image Capture software. You can also acquire a scan from the Print & Fax > Printer browser. Open the software from the dock or from the Applications folder. In Apple Preview, choose File > Import from Scanner. In the Image Capture program select the all-in-one from the list of devices.

For the Print and Scan. Open System Preferences from the Apple Menu. Click Print & Fax and select the all-in-one. Click the Scan tab and Open Scanner. Then click Scan.

With the HP software you can launch a scan from the computer or from the scanner (but only if the monitoring program is running). You need to set up the HP Utility for the scan task manager.
This site has the full set of steps: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02456650&tmp_task=useCategory&lc=en&dlc=en&cc=us&product=458978#N2158 .

Sometimes an all-in-one will work for printing but not for scanning due to a damaged cable. Scanning requires bi-directional communication with the printer. Try replacing the data cable. If you use a USB hub or print server, try a direct connection to the computer.

I hope this helps.

Cindy Wells

download from the site

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=458978#N193

Go to HP.com and look inder downloads.support. You can get the install wizard for your printer and OS, for free. Follow the directions and DO NOT USE plug and play.

Hello,

Just click on the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=uk&lc=en&dlc=en&product=441115

then choose for your computer's OS from the dropdown button and click on Next. Then follow the steps to download and run.

Thats it. Thank you for using FIxYa.

I think ur printer cartridge ink is finished. Other wise the cartridge circuit is dear.Pls replace ur ink cartridge .inform me result

it could be the coagulation of ink in between the cartridgebetter dip it in mild hot water for some times and replace it wiping the water. it would do the trick and solve your problem .

If this solution helpful/useful for you please rate the solution. THANKS FORUSING FIXYA.

here is the link for your driver http://www.siliconguide.com/drivers/device/96/

Hi,

Good day. If you're getting this message all you need to do is to install the software or the driver for your printer. This is because the computer detects your printer but it didnt have the software properly installed that's why it cant run properly like before. This is a normal problem for all devices. Just have the installation disc that came with your printer and install it then just restart your printer and then it should work fine. Don't forget to check the cables. Hope this will help to resolve your problem. Have a great day.

HI,
It seems that you need to clean up the cartridges.
Follow the simple procedure and I hope it should work.
1 open lid to expose cartridge area
2 push power button to power off
3 allow printer to shut down- cartriges will park on the left side.
4 Look for any ink residue under where the cartridges normally are. Gently clean this best You can.You may use a screwdriver then several paper towells and iso alcohol. Under the cartrige area is a black plastic tray which can slide forward. I cleaned best I could under that as well.
5 close lid and power up and it should work.
You shall also hold the restart button on your printer for 1 minute just in a similar way you push it to start.This also helps sometimes.

Let me know if you need any further assistance.

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=441115

Are u Using Refilled cartridge, Some times Refilled Cartridge Not Detected In Printer. Best Way Replace New Cartridge.
Best of Luck.