20 Most Recent HP PSC 1410 All-In-One InkJet Printer - Page 5 Questions & Answers


. Sometimes the power supply unit must be checked as a poor SMPS unit can deliver low voltage and cause issues to the printer function.You need to be tech savy to check using a multimeter on the power supply input and output voltages. Check all the leads and connections of the mother board , the tags to the ink cartridge. Also check the mechanical settings of the ink cartridge , if jammed or tight remove motor and manually free the drive before it is set back.

http://www.fixya.com/support/r5826301-working_switch_mode_power_supplies


Thank you for using Fixya

HP PSC 1410... | Answered on Aug 12, 2011


download from the site

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=458978#N193

HP PSC 1410... | Answered on Aug 05, 2011


download from the following site

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=458978#N193

HP PSC 1410... | Answered on Aug 05, 2011


try to align the printer heads, here how first you on the unit it print sample pages then face it on the scanner face down press the button scan wait till the power light stop blink then try to print again

HP PSC 1410... | Answered on Jul 31, 2011


You just need to download the drivers from their website. Everything on that disk is free online! You can find everything for your model # here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=441115
Please leave positive feedback! Thanks :)

HP PSC 1410... | Answered on Jul 27, 2011


Hi

Correct you have to replace the cartridge(s) but still try to clean the contacts of cartridge and the contacts in the carriage to try. Normally when you re-fill the ink is spilled. Clean it with a tissue paper or a clean thin cotton cloth.

HP PSC 1410... | Answered on Jul 15, 2011


Go to this HP link and select your OS for the drivers/software:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=458978


Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

HP PSC 1410... | Answered on Jun 30, 2011


Unable to proceed scan documents after 2/3 pages in - HP PSC 1410 All-in-One which i intend to save in pdf file.

HP PSC 1410... | Answered on Jun 23, 2011


Hello,

Just click on the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=uk&lc=en&dlc=en&product=441115

then choose for your computer's OS from the dropdown button and click on Next. Then follow the steps to download and run.

Thats it. Thank you for using FIxYa.

HP PSC 1410... | Answered on Jun 23, 2011


I think ur printer cartridge ink is finished. Other wise the cartridge circuit is dear.Pls replace ur ink cartridge .inform me result

HP PSC 1410... | Answered on Jun 14, 2011


Please remove all cartridges. Using a moist cloth clean the golden contacts on cartridge as well as printer. DO NOT touch nozzle of cartridge. Dont insert the cartridge yet.

Please do this :
1. Remove the power cable from printer. Remove the USB cable that connects printer to computer (remove it from printer as well as computer's usb port)
2. Press the printer power button and keep pressed for 3 minutes then release
3. Now plug in the power cable and usb cable (connect printer to computer) and power on the printer.

Now insert cartridges and see if error goes away.

You can also click the link below for any future troubleshooting with the printer. It's a self help guide.

Click Here

Regards,
Shrey

P.S. If this did not help, please let me know and will be glad to help you further.

HP PSC 1410... | Answered on Jun 01, 2011


HI,
It seems that you need to clean up the cartridges.
Follow the simple procedure and I hope it should work.
1 open lid to expose cartridge area
2 push power button to power off
3 allow printer to shut down- cartriges will park on the left side.
4 Look for any ink residue under where the cartridges normally are. Gently clean this best You can.You may use a screwdriver then several paper towells and iso alcohol. Under the cartrige area is a black plastic tray which can slide forward. I cleaned best I could under that as well.
5 close lid and power up and it should work.
You shall also hold the restart button on your printer for 1 minute just in a similar way you push it to start.This also helps sometimes.

Let me know if you need any further assistance.

HP PSC 1410... | Answered on Jun 01, 2011


http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=441115

HP PSC 1410... | Answered on May 28, 2011


Hi,

Good day. If you're getting this message all you need to do is to install the software or the driver for your printer. This is because the computer detects your printer but it didnt have the software properly installed that's why it cant run properly like before. This is a normal problem for all devices. Just have the installation disc that came with your printer and install it then just restart your printer and then it should work fine. Don't forget to check the cables. Hope this will help to resolve your problem. Have a great day.

HP PSC 1410... | Answered on May 22, 2011

Not finding what you are looking for?
HP PSC 1410 All-In-One InkJet Printer Logo

757 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6069 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • HP Office Equipment & Supplies

Most Popular Question

im trying scan from printer computer

  • Office Equipment & Supplies
Loading...