Top 20 Epson 2580 Perfection Photo Scanner - Page 4 Questions & Answers

If I understand correctly, you are saying that after replacing the main board in your Epson LX350 printer, you have found that one of the pins is not functioning properly and it only resets when you switch the machine off. In this case, it's possible that there is an issue with the connection between the pin and the main board or the pin itself may be damaged. Here are some steps you can take to troubleshoot the issue: Check the connection between the pin and the main board. Make sure that the pin is securely connected to the main board and that there are no loose connections. Inspect the pin itself for any physical damage or signs of wear and tear. If the pin is damaged, it may need to be replaced. Check if the pin is properly aligned with the other pins on the main board. If it is misaligned, this could cause the issue you are experiencing. Check if there are any firmware or software updates available for your printer. Sometimes, updating the firmware or software can fix hardware issues. If none of these steps resolve the issue, you may need to contact Epson support for further assistance or consider consulting a professional technician to diagnose and fix the problem.

Question edited for a lot more clarity, full make model (what it is)'. Question moved to maker category. In the link https://www.google.com/search?q=printer+b310n+maintenance+box ..

I'm sorry to hear that you're experiencing an issue with the power button cord on your Epson SC P600 DTG mod. To address this issue, you'll need to locate the cord and make sure it is properly connected. Follow these steps to troubleshoot the problem:

1. Turn off the printer and unplug it from the power source.
2. Check the cord connection on both ends. Make sure it is firmly attached to the power button and the printer head or board.
3. If the cord is loose, carefully reattach it to both ends.
4. Plug in the printer and turn it on to test if the issue has been resolved.

If the problem persists after following these steps, it may be necessary to seek assistance from a professional technician or the manufacturer.

The flashing green light on your Epson Stylus CX3600 printer is indicating an error with the ink system. The error message you mentioned, "not to press the ink button unless the green light is on and not flashing", is likely referring to the ink button that is located on the side of the printer and is used to reset the ink levels. To resolve the issue with the flashing green light, try the following steps:

1. Turn off the printer: Turn off the printer and disconnect it from the power source.
2. Clean the ink cartridges: Remove the ink cartridges from the printer and clean the contacts with a soft, damp cloth. Make sure not to touch the ink nozzles or the copper contacts.
3. Check for clogs: If the problem persists, check the ink cartridges for clogs and clean the print head.
4. Reinstall the ink cartridges: Reinstall the ink cartridges into the printer, making sure that they are properly seated.
5. Turn on the printer: Connect the printer to the power source and turn it on.
6. Check the green light: Observe the green light and make sure it is no longer flashing

If one pin of your Epson LX-350 printer is not printing even though you have checked the print head and the white cable, there are a few other things you can try to troubleshoot the issue:

1. Clean the print head: Use a cleaning solution and a lint-free cloth to gently clean the print head. This can remove any buildup or debris that may be blocking the pin.
2. Check the ink ribbon: Make sure the ink ribbon is correctly installed and not damaged. If it is damaged, replace it.
3. Replace the pin: If the pin is damaged or broken, it will need to be replaced. Consult your printer manual or contact Epson customer support to find out how to order a replacement pin.
4. Check the printer settings: Make sure the printer settings are configured correctly, especially the character set and print density.
5. Check the software: If you are printing from a computer, make sure the software is configured correctly and the correct printer driver is installed. Try printing a test page to see if the problem persists.

If none of these steps resolve the issue, it may be a hardware problem that requires a professional technician to diagnose and fix.

Is the paper positioned in the proper spot? Most scanners require the paper is positioned at the bottom left. It also sounds like it may be the settings in your scanner properties. If it is set to detect the paper size, it will often choose a smaller size. Go inside the scanner properties and manually select the size paper you are scanning or select "scan to fit".

To reset the counter on an Epson CX4200, follow these steps:

1. Turn off the printer and unplug it from the power source.
2. Hold down the "Stop" button while plugging the printer back into the power source.
3. Release the "Stop" button after five seconds.
4. Press the "Stop" button three times.
5. Press the "Color" button and then the "Power" button to turn the printer back on.

These steps should reset the counter on the Epson CX4200. If the problem persists, you may need to consult your printer manual or contact Epson support for further assistance.

Cleaning the print head of an Epson Stylus 4000 printer can help to improve print quality and resolve issues such as missing or clogged nozzles. One method of cleaning the print head is to flush an ammonia/alcohol solution through it. Here's a step-by-step guide on how to do this:

1. Turn off the printer and unplug it from the power source.
2. Prepare a cleaning solution by mixing equal parts of ammonia and water or isopropyl alcohol with water. It's important to avoid using high-concentration cleaning solutions as they may damage the printer's internal components.
3. Take a syringe or bulb syringe (usually can be purchased at a pharmacy) and fill it with the cleaning solution.
4. Remove any ink cartridges from the printer.
5. Locate the print head assembly. It is usually located behind the ink cartridges.
6. Gently insert the syringe or bulb syringe into the print head assembly and slowly squeeze the cleaning solution through it.
7. Use the syringe or bulb syringe to gently flush the cleaning solution through the nozzles until the solution comes out clean.
8. Allow the print head to dry for a few minutes before reinserting the ink cartridges and turning the printer back on.
9. Perform a test print to check if the cleaning improved the print quality.

Note that you may need to repeat this process several times to completely clear the clogged nozzles. Also, before performing any of the steps listed above, it is advisable to consult your printer user manual or contact Epson support for specific instructions regarding your printer model, as the location of the print head and the exact process may vary depending on the printer model.

Right here https://www.manualslib.com/manual/47933/Epson-Stylus-Photo-Rx580.html?page=70 https://www.google.com/search?q=maintenance+button+on+the+epson+stylus+photo+rx580+printer ...

If your Epson C1100 printer is taking multiple sheets of paper when trying to print one page, it could be caused by a few different issues:

1. Check the paper tray: Make sure the paper tray is loaded correctly and the paper is not jammed or bent.
2. Check the paper guides: Make sure the paper guides in the tray are adjusted correctly and not too tight.
3. Check the pick-up roller: Make sure the pick-up roller is clean and not damaged. If it is dirty or worn, it may need to be replaced.
4. Check the solenoid: Make sure the solenoid is functioning correctly and that the spring is properly connected.
5. Check the gears: Make sure the gears inside the printer are functioning correctly and that they are not worn or damaged.
6. If none of the above steps work, it is possible that the printer has a more serious problem that requires professional service.

It is important to refer to the user manual or contact Epson technical support for further assistance and specific troubleshooting steps for your printer model. It is also important to make sure the printer is not plugged in before attempting any troubleshooting steps. It is also important to note that, if you open the printer and move things around, it could have caused other problems that could have impacted the printer performance.

It is possible that your Epson WF-7820 is experiencing a paper jam or a misalignment of the paper cassette. If the paper cassette is not correctly inserted into the printer, the printer will display an error message that tells you to insert the cassette correctly. To resolve this issue, make sure the paper cassette is correctly inserted and that any paper jams are cleared. If the issue persists, try resetting the printer by unplugging it and then plugging it back in. If the error message still appears, contact Epson support for further assistance. Loading Paper in Cassette 1 (Upper Cassette) https://files.support.epson.com/docid/cpd3/cpd39348/Source/Printers/Source/Paper_Loading/Tasks/XP800/loading_paper_upper_xp800.htmlfaq-207896 ' SPT_C11CB58201 ' Epson WorkForce WF-7520 ... https://epson.com/faq/SPT_C11CB58201~faq-207896?faq_cat=faq-topFaqsWF-3820 Series User's Guide https://files.support.epson.com/docid/cpd5/cpd58812.pdf

This sounds like a tricky problem to solve! It could be a debris issue in the print head, but it could also be a voltage issue. If the voltage is too low, then it can prevent the nozzles from firing. To find out, you could open the head and inspect the nozzles. You could then use a multimeter to check the voltage at the nozzles. If the voltage is low, then you could try to adjust it to the correct level. If that doesn't work, then the head may need to be replaced.

If your Epson Stylus SX435W is indicating that there is no paper even though there is paper loaded, there could be several reasons for this issue. Here are some steps you can try to troubleshoot the problem:

1. Check that the paper is loaded correctly: Ensure that the paper is loaded into the printer's paper tray or cassette correctly. Make sure that the paper is aligned properly and not too tightly or too loosely loaded. Also, make sure that the paper is not curled or wrinkled.
2. Check for paper jams: If the printer sounds like the wheels are turning to engage the paper but the paper doesn't move, there may be a paper jam. Carefully check for any paper jams, and remove any paper that may be causing the problem.
3. Clean the paper feed rollers: Over time, the paper feed rollers can get dirty or covered in debris, causing them to slip and not grab the paper properly. Use a lint-free cloth dampened with water to clean the rollers. Be sure to let them dry completely before attempting to print again.
4. Reset the printer: Sometimes resetting the printer can clear any errors or issues that are causing the "paper out" message. Turn off the printer, unplug it from the power source, wait for a few minutes, and then plug it back in and turn it on again.

If none of these steps solve the problem, you may need to contact Epson support or take your printer to a service center for further assistance.

If you are having difficulty inserting the transfer belt unit into your Epson C1900 printer, there could be a few different issues causing the problem. Here are a few things you can try to troubleshoot the issue:

1. Check the transfer belt unit: Make sure the transfer belt unit is properly aligned and seated in the printer. If the unit is not properly aligned or seated, it can cause it to get stuck when you try to insert it.
2. Check the printer: Make sure there are no foreign objects or debris inside the printer that may be preventing the transfer belt unit from inserting properly.
3. Check for any visible issues: Inspect the transfer belt unit and the printer for any visible issues that may be causing the problem. This can include damage to the transfer belt unit or the printer, or foreign objects that may have gotten stuck in the printer.
4. Check the transfer belt unit pins: Make sure the pins on the transfer belt unit are properly aligned and seated in the printer. If the pins are not properly aligned or seated, it can cause the transfer belt unit to get stuck when you try to insert it.

If you have tried these troubleshooting steps and the problem persists, it may be necessary to have the printer serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs. I hope this information is helpful. If you have any further questions or need additional assistance, please don't hesitate to ask.

The Epson printer printing blank page when you have empty ink cartridge, outdated printer drivers, print head congested nozzles and more. Follow the steps to fix the Epson printer printing blank page issue: ·Restart the printer ·Fix the ink cartridge issue ·Update printer drivers ·Clean the printer print head Read more steps to fix the issue Epson printer printing blank page.

Do you mean your Epson Printer Printing blank pages? The Epson printer printing blank pages due to wrong paper size, outdated printer driver, Empty ink cartridge, dirty print head, improperly installed ink cartridge, and more. Follow the steps to fix the Epson printer printing blank page issue: ·Restart the printer ·Fill the empty ink cartridge and reinstall the new ink cartridge ·Update printer drivers. If you have done all the above steps but still the printer printing blank pages. Then follow more steps to fix the Epson printer prints blank pages issue.

Hi, please ensure that you've gotten the most updated drivers from the Epson website for your computer/Epson unit. Then you can restart both devices and check for scanning again. It's important to note any errors or newly blinking lights that occur during this scanning process, so that we can reference the product documentation to help troubleshoot the issue. Also, please test multiple document types to see if this has any affect on your scanning. Thank you.