20 Most Recent Dell 16 Bit PCI Sound Blaster Compatible 000963MH-06 - Page 8 Questions & Answers

It alway zs helps to know the model number. Witht that information, you should be able to find the specifications at the Dell support site. It would simply tell you in a specs sheet. I guess you could download HWinfo, a handy freeware program and check informaiton about components there. There is of course the option to download the user manual.

case size what? (this tell what mobo is inside) yeah.OS is what window 10?what is in your hand USB? device, cant guess that.do all ports fail?is USB 2 and 3 ports all turned on IN BIOS F2 pages.does keyboard USB fail on any USB portsdoes it fail in BIOS windows only or that and BIOS screens too. if fails in BIOS too, that means the ports some are tuned off in BIOS.

try asking dell

https://www.dell.com/support/article/en-ph/sln153567/how-to-find-warranty-status-and-information-for-your-dell-product?lang=en

Possibly incorrect battery installation

Restart the laptop and after the dell logo appears then disappears press the f8 key repeatedly until you see the "Advanced Boot Options" menu. Then highlight "Repair your computer" and press enter.

http://downloads.dell.com/manuals/all-products/esuprt_laptop/esuprt_latitude_laptop/latitude-e4200_service%20manual_en-us.pdf

First thing to do is make sure all the RAM and other connections are good and try again. IF the issue persists, take things out, remove everything but the monitor and see if you can see the POST screen, then power it off and put in the RAM and try again, then do the hard disk etc, You may be able to narrow it down that way.

first post what PC you own. or ask dell.com

replace the RTC coin cell batter if over 5- 7 years. old. It is that old, so...test the HDD fully .using a smart test app. data is a whole other matterplug the hdd into a HDD docking bay (buy one)it uses USB port.the pull the data off using any other windows based computer that works.works if lucky bad HDD have bad sectors now and now data is corrupted, the amount of uncorrupted data is not known by anyone on earth , only you, know that doing the work stated. looking and trying to copy data. can work and millions have every day. www.it's like saying my house was flooded, in a hurricane.what things in my home my be still good.?answer only you can look and see.that is why others asked can not answer any question like that. dell or any other person sitting in a text box 12,000 miles away.the cure is new hDD, new OS loaded.data recovery is process endlessly discussed in vast places on earth, google finds millions.42million hits. today.https://lmgtfy.com/?q=how+to+recover+data+off+bad+hdd&iie=1good luck finding data. if the motor is dead there will be no data.

What color(s) is (are) the blinking light? Is the blink a simple on/off or is there a pattern to the blinks (long/short)? Do any other lights come on and blink? (These could be on the keyboard or the battery health indicator LED.) If the light that is blinking amber or orange indicates that the system has failed the Power On Self-Test (POST). If the blinking light is white, the system is in sleep mode. Try disconnecting the power adapter. Take out the battery and remove all external peripherals. Press and hold the power button for 20-30 seconds to discharge the system's capacitors. Try to restart the machine with only the battery and AC adapter. Did the behavior change? You can remove memory and the hard drive to check if those are causing a POST failure. Reinstall one memory stick at a time if you have a pair or more. If you can get to the Dell splash screen, try pressing F12 to launch the diagnostics. (You may have to press the key repeatedly starting from a cold boot.) If the blinking light is alternating orange and white, then you could have a problem with the motherboard, battery or AC charging system. Since you believe that the battery and adapter are OK, then the problem would likely be the motherboard has been damaged. The damage could be at the connection for the charger or somewhere else. I hope this helps. Cindy Wells

Press Ctrl-P while booting up Management Engine will open use 'admin' as the password you are required to set up a new p/w, do it. It will prompt and say if you do it will reset, that's what is required! then exit, once it restarts, the error message disappears!! now you can install OS as usual

1-3-1 through 2-4-4 DIMMs not being properly identified or used need remove all ram and insert one at a time

Larry NG and JonSnell are right, so you have few options. One method is to try as many passwords as you can think of, since unfortunately, many people re-use the same passwords for different purposes. The Dell website has a Contact option for help, but as they advised you here already, that may not give you a good option. They may want to know more information than you provided here. What model Dell is it, for example? https://www.dell.com/support/incidents-online/en-us/contactus/Dynamic

You can use Kernel for Outlook PST Repair Tool to repair your damaged Outlook pst file successfully. Go to http://www.pstfix.com to download the tool and refer to http://www.pst.msoutlookrepair.com to know more about the pst recovery.

was it like when purchased?return if it was

You will need to go to customer care it will be great if your device still has warranty.

do you already install audio driver on your laptop? if not.

here

just download this software,no need search engine,no more tired of looking anywhere...instantly,it will be in your laptop for several minutes....

CLICK ME

KEY : JCCQ-MAKC-KACK-6TSE-BN35




Driver Robot updates:

* Sound card drivers
* Printer drivers
* Video card drivers
* Motherboard drivers
* Webcam drivers
* Wireless drivers
* Bluetooth drivers
* FireWire drivers
* Ethernet drivers
* Windows XP drivers
* Windows Vista drivers
* USB drivers
* Chipset drivers
* AC97 drivers
* DVD drivers
* Router drivers

just install it,scan and download... enjoy...

http://www.nsf.repair/ NSF Repair Kit is an end-to-end solution for the problem of corrupted Lotus Notes files of the NSF format. This Lotus Notes NSF repair tool uses a uniquely efficient proprietary file analysis core and a number of advanced algorithms to open files with any degree of damage and successfully extract their contents.

PC came new with W10-64bit.you meant just exactly after the upgrade it failed.right, you meant the UPGRADE (from what?) failed hard.that error means the boot files are corrupted.easy if HDD bad. test it.is the HDD good? did you use secure boot or legacy boot to do that,?There are lots of possible cures. here.one is to ask dell for help on there forum.they can tell you how the original OS was set up.and they also have your drivers.no clues.