20 Most Recent
Sony Cyber-shot DSC-H2 Digital Camera - Page 6 Questions & Answers
Sony's broken button issue
You need to use you fingernail and pop off the entire button assembly. When you have done this you will be looking inside your camera.
Set the new button assembly into the slots. It will not want to go on by just pushing down. The plasitc assembly is very slick so put a small piece of scotch tape the yellow stuff. I put the tape around the plastic assembly. Make sure you are only putting tape on the chrome plastic assembly. The reason for the tape is to get a good hold of the plastic asembly.
Once you have the tape on the assembly/chrome piece you need to really push down and twist clockwise. You will hear a click and then another click. Make sure you hear two clicks. I had to push and twist pretty hard to make it lock into place.
Camera won't stay turned on
It sounds like weak batteries in both cases. The zoom motor takes more power than displaying pics. DON'T USE "HEAVY DUTY" batteries - they're for kids toys. Use alkaline or rechargeable, and charge the batteries for AT LEAST 15 hours, even if your charger indicates they're fully charged after 1 hour. Please leave feedback if this helps.
My Sony DSC H-2 camera LCD display
Does the finder LCD work ? Push the button directly to the right of the eyepiece to toggle between the large panel LCD and the finder and PLAY a recorded pic. If it will display a recorded pic but not display a live pic, the shutter blades are stuck together. It'll have to go to repair - about a $105 repair.
File error
I take a picture and go back to view it and file error shoews up. Can those phtos be retrieved?
Dead program
mine says CONversion, what version are you trying to set?
Strange noise and fuzzy picture
First try resetting the phone to factory defaults..... After that if the sound still persists, it could be because of the interference of the external sounnds with the microphone of you camera.....Just try reducing your camera volume to nil.....And if the problem still persists, it could be the problem with the hardware...
Not finding what you are looking for?