20 Most Recent Maytag Neptune FAV6800AW Top Load Washer - Page 4 Questions & Answers

Unplug and let it sit for five minutes then plug it back in it should reset itself

Is the Machine a FAV6800A or a FAV9800A?

Do you want to DIY the fix?

The nd error code = No Drain error code.

You could have drain line clog, an issue with the drain pump or a stuck pressure switch. Do you hear the machines drain pump turn on and pump out water before entering lnto the spin cycle? Is there water left in the tub with the nd error code? If you can provide feedback on the questions above I will help guide through the troubleshooting steps.

You will need the Service Manual to troubleshoot.

The FAV6800AW/FAV9800AW Service Manual for reference. Sears Parts Direct for reference.

Rich

is the drain pump ok .ie if the water does not get out in the proper time the mach will think it is still full and will not speed up

There is a right lid lock and a left lid lock which did you change? The left lid lock is a lock and the reed switch which tells the machine control the lid is closed and can start the cycle.

Possibly belt slipped or a water level too low or machine isnt sitting level