Top 10 Canon PIXMA MP150 All-In-One InkJet Printer Questions & Answers

Canon PIXMA MP150 All-In-One InkJet Printer Logo

Question

  • 64,905 People Helped

canon pixma mp190 error code

canon pixma mp190 error code e4

Posted by on

Answer

  • Most Helpful of 19 Answers

My canon mp190 gives E3 paperjam error but there is no paperjam, how do i fix it?

Posted on Feb 27, 2010

Question

  • 56,059 People Helped

Reset ink level on CANON MP 140 PIXMA PRINTER

When installing refill cartridges the ink level still shows empty on the computer ink level status manager. I tried to unplug the printer for a couple of minutes after installing the refill cartridges but to no avail. What can I do to fix this? The printer does print with these cartridges but the quality on the ink printing looks to be not all that good.

Thanks

Posted by on

Answer

  • Most Helpful of 12 Answers

How to reset the Canon MP150 after a refill (Step 10 concerns refill; instructions below the steps):
Method1 (Safe Factory Method):
1) Disconnect the printer’s power outlet
2) Press and hold the power button while connecting the power outlet back.
3) While still holding down the power button, press the reset button twice.(red circle with a triangle)
4) Release the power button
The printer takes about 10 seconds to show the number 0.
5) Press + to change the value from 0 to 1.
6) When this value is 1, press colour button; this will light up two leds.
One is for plain paper and the other for photo paper. At this point is feed the printer with paper.
7) Press the power button twice and the printer will print a some stuff (if it doesn't print by itself, then press the "color" button once and the test sheet will print). Don’t worry much about the printed material. I got some stripped lines and some numbers. I believe that my colour cartridge is clogged which is why I got the green strips.
When you print this sheet the value in the display returns to zero.
8 ) Open the printer cover cover (not the scanner cover) and remove the cartridges. With the printer still open, disconnect the power outlet.
9) Close the lid and turn on the printer.
10) Refill cartridges and place them back in their nice little abode in the printer.

Posted on Jan 09, 2009

Question

  • 40,623 People Helped

canon mp150 pixma printer error e5

I refilled the ink cartridges and re-installed them now get e5 error message that the ink is not canon and won't clear.

Posted by on

Answer

  • Most Helpful of 4 Answers

dear warenout

try this methode

Methode 1

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting formenu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection


that's all


maybe it can fix your problem



thanks


cropp

Posted on Mar 15, 2008

Question

  • 38,602 People Helped

Canon PIXMA MP140, refilled cartridge don't work

Canon PIXMA MP140, refilled cartridge don't work

Posted by on

Answer

  • Most Helpful of 17 Answers

Best solution i think
How to reset the Canon MP150 (also worked with my MP140 so it might work with others as well) after a refill (Step 10 concerns refill; instructions below the steps):
Method1 (Safe Factory Method):
1) Disconnect the printer’s power outlet
2) Press and hold the power button while connecting the power outlet back.
3) While still holding down the power button, press the reset button twice.(red circle with a triangle)
4) Release the power button
Printer takes about 10 seconds to show the number 0.
5) Press + to change the value from 0 to 1.
6) When this value is 1, press colour button; this will light up two leds.
One is for plain paper and the other for photo paper. At this point is feed Printer with paper.
7) Press the power button twice and then press the colour button once. The printer will print a some stuff. Don’t worry much about the printed material. I got some stripped lines and some numbers. I believe that my colour cartridge is clogged which explains why I got the green strips.
When you print this sheet the value in the display returns to zero.
8 ) Open Printer's cover cover (not the scanner cover) and remove the cartridges. With Printer still open, disconnect the power outlet.
9) Close the lid and turn on The printer.
10) Refill cartridges and place them back in their nice little abode in The printer.

Posted on Nov 05, 2009

Question

  • 28,138 People Helped

Canon PIXMA MP150 All-In-One driver download

my printer software mis

Posted by on

Question

  • 25,207 People Helped

Canon mp160 E2; printer won't re-set

I tried to scan a document, it told me insufficient memory which is weird because it was only one black & white page.

Tried unplugging and the on/off switch but E2 message won't re-set.

Thanks,
Cindy

Posted by on

Answer

  • Most Helpful of 3 Answers

hi dear

may the error code or how many blinking can solve your problem

this is the list of error code

How to clear Error Code Canon printers MP150 MP160
CANNON Printers MP150/MP160 ERROR CODE


E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber
full

E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error





try this methode

Methode 1

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting formenu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED
lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks

0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection


that's all


maybe it can fix your problem



thanks


cropp

Posted on Mar 17, 2008

Question

  • 23,927 People Helped

Error message: Service error 5100 on my new Canon MP160 Printer

I have a brand new Canon PIXMA and i have downloaded all of the software as it told me to in the directions that came with the pc.... but when i got to print something i get an error message that pops up and says service error 5100. can anyone help me with this?

Posted by on

Answer

  • Most Helpful of 8 Answers

Error Code.........Description
5000 ...................Home position error
5100 ...................Carriage control error
5200 ...................Head temperature sensor error
5400 ...................Printer temperature sensor error
5600 ...................No cartridge error
5C00 ...................Purging operation error
5200 ...................Scanner cartridge error

As a technician, I have worked on tons of printers. This particular error had stumped me for a while, but I finally found the cause. As others had pointed out before, it can have alot to do with some obstruction in the print path, the gears, or ink on the clear plastic encoder strip. You're on the right track - I found the the purge cap (the white sliding mechanism that the print head parks to when it's not in use) was not lubricated well enough from factory. If you lubricate the sliders with some white grease (don't get it on the small wipers or the black caps) the mechanism can now slide more freely, and the unit can park the head properly without giving you the dreaded head homing error 5100 (or E-2-2 on the LCD display) Keep in mind that this repair will probably require you to remove the right panel off of the printer to gain access to the purge mechanism. There are two screws behind the printer, and two in front for each corrosponding side panel (the front screws are behind the grey front panel of the printer - open the top cover to see the clips which hold the front cover on) Hope this helps some of you out.
good luck (^_^)

Posted on Jan 13, 2009

Question

  • 21,419 People Helped

mp 145

is there any solution to redetect the cartridge in mp145

error e15

Posted by on

Answer

  • Most Helpful of 11 Answers

How to reset the e27 for canon mp145 printer?

Posted on Dec 24, 2008

Question

  • 21,183 People Helped

Cannon PIXMA MP150

I am receiving an error regarding the waste ink tank. The Error Code is E/2/7. Is there a way I can fix this on my own? Thanks.

Posted by on

Answer

  • Most Helpful of 4 Answers

I wrote this on another help site I thought I'd post it here.

Let me just say this I have had many dealings with this printer type.

Before we start what needs to be done is that the two little filters under the printer carts need to be cleaned as well as the two little rubber parts housing the filters; wash these in water (after taking out of the printer) the filters should come up white-ish.

Also make sure that while you have the filters out to clean in and around that area with a cloth / tissues something to absore excess ink. After you clean this however you still need to service resert your printer.

The method for doing so is worded very badly on alot of sites so I will explain my way.

(1) have your printer power down ie. off, just to make sure pull the plug out and wait 10 seconds.

(2) plug printer back in, now Hold down the Stop/Reset button don't let go.
(2a) push and hold the on/off button

----at this point both fingers are holding down the buttons.----

(3) take your finger of Stop/Reset, pause maybe a second now press stop/reset button once and then press again and hold.

--- both fingers at this point are hold down both buttons----

(4) take your finger off on/off and now finally take your finger off stop reset.

---wait for the printer to go into its service mode ie. wait maybe 30 secs a min whatever till the printer carage has moved back into ints original spot.

---after this has occoured you should be able to press Stop/reset to cycle though the options

each time you press Stop/Reset Alarm and on/off should alternate lighting up. Hope this helps.

0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)

Also google MPtool and downlad that this can reset your ink carts to full again, and can help with other errors, BUT your printer needs to be in low level mode. Google that I can't find that at the moment.

Hope this helps good luck

Posted on Dec 10, 2008

Question

  • 18,926 People Helped

Canon Pixma MP150

I would like to know how to download the software for the Pixma MP150 printer so that I can print documents

Posted by on

Answer

  • Most Helpful of 6 Answers

I would like to know how to download the software for the Pixma MP150 printer so that I can print documents

Posted on Nov 28, 2008

2,610 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2279 Answers

Ekse

Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PIXMA MP150 All-In-One InkJet Printer PIXMA

  • PIXMA MP150 All-In-One InkJet Printer PIXMA

Most Popular Question

fix error code 5 in printer

  • Office Equipment & Supplies
Loading...