Top 20 Konica Minolta Minolta Action Zoom 60 Freedom Af Date Zoom 35 - 60 Mm Aspherical Lens Questions & Answers

You may view/download the manual (such as it is) at http://www.fixya.com/support/p4664553-konica_minolta_minolta_action_zoom_60_fr/usermanual-89CA9CC-pdf

Page 117 says it has to be done at a Minolta Service Centre. https://upload.cyfrowe.pl/cyfrowe/instrukcje/aparaty/minolta/minolta_z2_eng.pdf https://www.google.com/search?q=konica+minolta+dimage+z2+replace+memory+battery ..

The backup cell is rechargeable and when the main battery is reinserted and charged, it will charge the backup cell after a while.

If your Konica Minolta Dimage Z6 camera is working fine but is not being recognized by Windows 11, there are a few things you can try to troubleshoot the issue:

1. Check the USB cable: Make sure that the USB cable you are using is properly connected to both the camera and the computer. Try using a different USB cable to see if that resolves the issue.
2. Check the USB port: Try connecting the camera to a different USB port on your computer to see if the port is the issue. Some USB ports may not have enough power to detect the camera.
3. Install the camera driver: If the camera did not come with a driver disc, try downloading and installing the driver from the manufacturer's website. Make sure to download the correct driver for your camera model and operating system.
4. Restart the computer: Sometimes, restarting the computer can help to resolve issues with USB devices not being recognized.
5. Try a different computer: If the above steps do not work, try connecting the camera to a different computer to see if the issue is with the camera or the computer.

If none of these steps resolve the issue, it is possible that there may be a hardware problem with the camera. In that case, it may be necessary to contact the manufacturer or a qualified technician for further assistance.

A circuit or wire short will need to be diagnosed with a meter or send out for repair

eBay has number of replacement choices...www.ebay.com

Yes you should format it.

Check your memory cards. If you are using SD cards, there is a small slide-lock on the side of card. Move the slide away from the LOCK icon, re-insert the card in the camera, being careful not to cause the slide to move again, and you should be able to use the card normally.

we would need to know what model camera you are using and what manufacturer, type, and size of SD Card you are attempting to use. Some cameras are not able to accept certain types and sizes of cards. Some may be able to with firmware upgrades.

You have a memory card in? Formatted?

c 400 is the exposure lamp on the copiers is failing or has failed , change it

have you tried replacing the batteries ?

Hi Femi, I have this site for you where it has steps on how to do that ( number 11 ). Hope it helps. FAQ KONICA MINOLTA United Kingdom

What model K-M camera? What exposure mode(s) are you using?

What model KM camera? What type and size memory card?

Thermistor abnormal function in the fusing unit .Clean the fusing unit thermistors ,inspect the rollers and bearing and the heater lamp continuity.

If the pictures were on a memory card and you haven't done anything to the card since deleting them, then you have a chance to recover them. Do a Google search for "data recovery software" and select a program for your computer and operating system. Put the card into a card reader attached to your computer and run the program.

Make the camera mode auto or turn the flash mode ON. Then click a snap. If the flash not working then its a flash tube cutoff problem. Please visit a repair store and replace the Tube. Cost 5$.

Sounds like electrolytic capacitor dried up needs curing, which is power on capacitor and left it absorb some moisture in humidity on power. Some time a few minutes, hard cases may take a few days.