Canon DR-1210C Scanner - Answered Questions & Fixed issues
Need step by step instructions
http://www.usa.canon.com/cusa/support/office/imageformula_scanners/imageformula_dr_1210c/imageformula_dr_1210c_universal_color_scanner?selectedName=DriversAndSoftware
Hi, heres the link.
Thanks
Adam
please leave me some feedback
Canon DR-121OC
Uninstal all the software for the scanner. Install the correct ISIS?TWAIN Drivers from the following link.
http://software.canon-europe.com/products/0010336.asp. Install CapturePerfect.
(Incase you did not know, the ISIS/TWAIN Driver is to connect the Computer to the scanner and CapturePerfect is purely 'Scanning Software', just to facilitate easy scanning.)
S. Mohan, India
Scanned Image is all black
Try uninstalling and reinstall the scanner again. Try on a different computer. If even after this the problem remains, may be the there is some hardware fault (failure of light) in the scanner. How is it in color?
S. Mohan
How locate and transfer job registration tool data for new installation
There are 2 methods:
1) On the existing PC, start the Job registration tool, click the "Administrators" button (on the bottom of the dialog), then click the "Backup" button in the dialog that appears. This will save a registry file that you can then transfer to the new PC.
2) Use regedit to browse to the
HKEY_CURRENT_USER\SOFTWARE\Canon Electronics Inc.\DR-1210C-JobTool
branch. Save this branch to a file, then transfer it to the new PC.
Cheers!
Grayblue Background on scans
A color scan will give real output as it is. If the background is grey, the output will also be grey. If you select 256 Color output, there may be small change in color, as compared to the original. If you select grey output, all colors will be converted to Grey. If these files are converted to PDF, it will be same, except in ODF format.
If you select B&W you can save the file in TIFF format. Unlike grey or color, each pixel can be either black or white only. To scan in black and white you must select right brightness. By doing os you can eliminate background (technically noise) and capture foreground(data)
S. Mohan
How to crop?
Select the area you would like to retain by draging across and click crop. (Normally it is found under EDIT command ) It is extremely simple
S. Mohan
Hi, i have a Canon dr 9050c scanner. I have the
It sounds like you diagnosed it.
The tray "paper detect sensor" thinks it has paper in it, and if it doesn't have paper in it...there's a problem with the sensor.
Take the tray off and inspect the sensor. Blow out around the sensor and it's PCB and make sure it is not out of position. Check the sensor lens for anything blocking it, and retest. If it still shows always on, then replace the sensor. Press the "count only" button to illuminate it, and press the "start" button. If the scanner works properly (tray lifts, pulls paper through the scanner, and counts it)...well then you have software or connectivity issue.
Hope that helps,
Scan-R-Store
Scan Store provides service and maintenance contracts on all Canon Fujitsu...
Does error P07 on a Canon DR-G1100 indicate that there is a paper jam or that a counter needs to be reset?
P007 indicates that a document has jammed before exiting the registration post sensor. Make sure the path is clear and no staples are stuck in the rollers. I like to use a microfiber cloth, with a small amount of 50/50 alcohol on it, to wipe down the entire feed path; top and bottom. The microfiber cloth will grab staples that may be wedged between the rollers/roller openings. Beyond that, it could be a timing issue from a bad/loose drive belt. Actually, there are quite a few things that could cause a paper jam before exiting the post registration sensor. Wipe it down and let me know.
Scan-R-Store
Not finding what you are looking for?
