Maytag MDB7100AWB Dishwasher - Answered Questions & Fixed issues
Maytag Dishwasher flashing lights
I have the same problem with the lights flashing on the control panel.
It pops up every 4 or 5 months. The only solution I have found is to
press the delay/resume button one time then press the drain/off button
twice. You may have to hold the keys down for a couple of seconds.
This seems to reset something in the panel. Make sure you haven't
pressed the 3 second lock button or it won't work.
5/9/2021 12:54:40 AM •
Maytag...
•
Answered
on May 09, 2021
•
15,772 views
My Maytag dishwasher model MDB7100AWB stopped
More than likely the control panel is defective. Contact the company at the link for troubleshooting help[ and also the parts that you may need. https://www.repairclinic.com/
6/27/2017 4:13:21 PM •
Maytag...
•
Answered
on Jun 27, 2017
•
339 views
How do I stop glass etching in my dishwasher
I believe most dishwashers will etch , to some degree, over time with repeated washings. The type detergent you use could also factor in as well as the temp you wash at.
9/6/2014 12:19:34 AM •
Maytag...
•
Answered
on Sep 06, 2014
•
282 views
Lighted "3" shows, dishwasher won't start
PRESS AND HOLD THE BUTTON NEXT THE LOCK3 LIGHT FOR 3 SECONDS TO UNLOCK THE CONTROL PANEL. TO RELOCK THE CONTROL PANEL PRESS THE SAME BUTTON FOR 3 SECONDS. THANKS AGAIN
7/1/2014 6:53:08 PM •
Maytag...
•
Answered
on Jul 01, 2014
•
329 views
Where is the fuse
Should be next too or on the control panel . No main fuses, uses house circuit breakers.
5/15/2014 2:10:35 PM •
Maytag...
•
Answered
on May 15, 2014
•
85 views
Maytag dishwasher model MDB7100AWB has power to
Hello,
No thier is no fuse so what the most likely problem will be a defectice door switch switch so even though the door is closed the switch thinks its open and will not allow the dishwasher to start.
GENE
6/22/2013 8:39:19 PM •
Maytag...
•
Answered
on Jun 22, 2013
•
1,588 views
Rusty dish rack
Clearly a design or manufacturing flaw. I have the same model and the rack is disintegrating after 6 years. I believe it is a manufacturing flaw. Our previous dishwasher rack lasted over 20 years in the same conditions. Same construction, vinyl covered steel. New upper and lower racks cost over 200.00 and there is no guarantee that this won't happen every six years. I recommend a new non-Maytag dishwasher as soon as you can. Meanwhile, limp along with the defective racks.
3/4/2013 1:25:36 AM •
Maytag...
•
Answered
on Mar 04, 2013
•
2,633 views
Power okay but won't work
My guess would be the door latch switch, if it is out of adjustment or not working the machine will think the door is open and won't run.Some dis-assembly might be needed of the door to locate and check the switch.
See this
12/11/2012 10:08:28 PM •
Maytag...
•
Answered
on Dec 11, 2012
•
113 views
How do I turn off the heated drying?
There should be a heated dry button under options.Hope this helps.https://www.maytag.com/digitalassets/MLPDF/Use%20and%20Care%20Guide%20-%206-917071.pdf
10/18/2012 8:09:18 PM •
Maytag...
•
Answered
on Oct 18, 2012
•
301 views
When we start dishwasher just groans
Well first I would have to know if the dishwasher is actually flowing with water or not. If their is no water flowing out then you probably just have a blocked line from deposits in the water. If you are getting water but the dishes arent getting clean then you probably have a bearing out on the wash rotor. hope that helps.
10/1/2012 10:18:43 PM •
Maytag...
•
Answered
on Oct 01, 2012
•
170 views
Not finding what you are looking for?