Kodak PROFESSIONAL 9810 Thermal Photo Printer - Answered Questions & Fixed issues
ERROR SERIVICE 3.43.A
Bar code on the left side of the film roll is either damaged, or the
optical sensor is dirty of failed. Could also be the processor as well.
10/17/2013 9:08:44 PM •
Kodak...
•
Answered
on Oct 17, 2013
•
1,101 views
Thermal ribbons broke in dye sub printer
hi,
by ripped, do you mean that the ribbons have come off the hinges or are they torn?
if they are torn, any small cracks or torn edges will not harm much. but if the ribbon is sliced to pieces, they have to be replaced, as you cannot work with torn ribbon.
here is a link to the manual with which you can replace the ribbons.
cheers
8/5/2012 4:10:36 PM •
Kodak...
•
Answered
on Aug 05, 2012
•
244 views
Why do I get a check ribbon error message on start
this is because your ribbon is getting worn out day by day.
any
small cracks or torn edges will not harm much. but if the ribbon is
sliced to pieces, they have to be replaced, as you cannot work with torn
ribbon. here is a link to the manual with
which you can replace the ribbons and sooner or later you need to do that
Regards
12/16/2010 5:14:05 AM •
Kodak...
•
Answered
on Dec 16, 2010
•
239 views
My kodak verite 55 printer says it is out of paper, but it is not. It also says the printer is not recognized. Any ideas?
- Check to make sure that the paper tray is loaded correctly and that the paper is not jammed in the printer.
- Make sure that the paper guides in the tray are adjusted correctly for the size of paper you are using.
- Check to see if the printer driver is up to date. Outdated printer drivers may cause the printer to not be recognized by the computer. You can download the latest driver from the Kodak website.
- Check the USB cable that connects the printer to the computer to ensure that it is properly connected and that there is no damage to the cable.
- Restart the printer and the computer and try to print again.
- If the issue persist, run the printer troubleshooter, it might help you to identify and fix the problem.
- If none of the above solutions work, it is possible that the printer's paper sensor is malfunctioning. In this case, contact Kodak customer service for further assistance.
It's important to follow the instructions carefully and if you have any doubts or difficulties, consult the printer's user manual or contact the manufacturer for assistance.
1/24/2023 7:31:57 AM •
Kodak Office...
•
Answered
on Jan 24, 2023
•
38 views
My Kodak Ektapro 5020 double plays every slide
Hi,
if you need to purchase a special slide, you can call Kodak directly and make the request. They can either direct you to the product on their website or one of their vendors. And for the double slide issue, I would suggest leaving a blank space between each slide as a round about solution. Otherwise, you can reference the product manual to help overcome this.
Thank you.
11/26/2022 3:21:04 AM •
Kodak Office...
•
Answered
on Nov 26, 2022
•
32 views
I cannot print a word document
You can try use a PDF print driver and see what is the output and Error.
Please post more information such as error and what happens when you try printing, if the PDF solution does not work
10/20/2022 9:48:59 AM •
Kodak Office...
•
Answered
on Oct 20, 2022
•
66 views
Not finding what you are looking for?