20 Most Recent Logitech Harmony 520 LCD Remote Control Questions & Answers

youtube have some useful videos Logitech Harmony One LCD Installation Part 1 Opening the H1 Read the comments for the repair company

No other remote control, than its original, can't be paired with any of blu-ray players. Just try and feel right.

I can help you reprogram your Logitech Harmony 520 remote for your LCD TV.

The Logitech Harmony 520 remote control is programmed through the Harmony Setup Software you can download from here.

Once installed, you will simply run the software, and select the devices you would like to control from menus. The software finds the right codes for you and loads them into your remote control.

I hope that helps.
_____________________________________________
Harmony 520 Manual Download
Logitech Harmony Firmware Update
Harmony Win Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

if new use the instructions that came with it, try the codes for your brand set and hope it works.

Just a message to all that have problems with there Logitec remotes. My remote went into something called a "safe mode" when my partner changed the batteries while holding the power button.... I pressed every single button to try and get out of it but nothing seemed to work, (I was getting pretty frusterated, there is nothing in the manual to tell you how to fix this problem), however, I have now learnt that as you replace the batteries you need to have the number 2 button held in as you replace the last battery. This works 100% so if you have any trouble with the "safe mode" then this is what fixes it.

Carly.

Visit this site for more details. Type in the site name "Electro-help" either Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as electronics equipments' repair help.

Hi. You will need to add the TV to your Harmony account in the software. If you do not have the software, you can download it at http://logitech.com/myharmony.

1. Launch the software and log in to your account.
2. Click 'Add Decice.'
3. Enter in the TV's model number, etc.
4. Click 'Update Remote.'

Your remote shoule now work on the TV.

Please refer to the Logitech Harmony 520 user manual.

Have you tried to restore or update the remote software? Go to the link below and update the software, this should fix your problem...

http://www.logitech.com/en-us/support-downloads/downloads/universal-remotes/devices/371?section=downloads&bit=&osid=1

First click the "TV" button and then try switching inputs.

Here's how. Logitech doesn't cooperate on these issues. Not sure why they're so secretive, but here's the skinny.

Take the four screws out from under the batteries. On each side of the remote there are four spots (or buttons) where you have to insert a *very thin* screwdriver or blade of some type and push to separate the cases. The first set of buttons are located on either side of the "Glow" button. The next ones are on either side of the <- and -> buttons. The next set is on either side of the "Stop" and "Play" buttons. The last is on either side of the "Activities" button. Just insert a flat edge and press as you gently pry the casing apart with your fingers. Take your time and don't force it to open. Hope this helps.

A solution for this problem is described in

http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/11941/kw/stuck%20in%20safe%20mode

Note: In the solutions page listed by the above webaddress, and after the "Upgrade Success" graphic, step 5 may have neglected to mention that the batteries need to be reinserted before testing.

If you have the USB cable that came with your remote, connect your remote to your computer using the cable.
Go to www.logitech.com/myharmony and identify your particular remote (i.e. Harmony 520).
The site will download setup software into your remote and then ask you to set up your account.
Beyond that point, the site will provide you with a clear, step-by-step process which will ask you to identify the activities you'd like to set up (watching tv, a movie, etc.). Be sure you have the brand names and model numbers of the devices you'd like to link to your remote.
Programming is done automatically without your having to look up codes, etc.
When everything is done, click the "sync" button or whatever command button completes the programming for the Harmony 520 (I say "sync" because that's the closing command for the Harmony 600, which is the one I have. I would think the closing command is the same or similar for the 520).
After that, you're good to go.

Happy viewing.

You should just be able to plug the remote into your computer with the USB cable supplied, go to the Harmony website listed with your product packaging, and Harmony will walk you through (very user friendly interface) a process which sets up your personal account, downloads the necessary setup software into your remote, and automatically programs your remote to whatever device you identify. With what you've said, all you need in addition to the Samsung brand name is the model number. The rest is done by Harmony including code installations.

I have the Harmony 600, linked to a tv and vcr and the setup/programming process was as uncomplicated as anything I've seen.

1. Remove the batteries. While holding the 2 button down, connect the USB cable. The remote will boot into normal mode.
2. Update the firmware. Update the configuration.
3. There could be a stuck button on the remote causing the symptom. Remove the batteries from the remote. Push in, and massage each button ensuring it is not stuck down. Replace the batteries and Update the firmware. Update the configuration.
4. Remove the batteries from the remote. Manually place the remote into `Safe Mode` by holding off and plug in the USB. Upgrade the firmware in the remote. Update the configuration.

FIRMWARE:
1. Log into the Logitech Harmony Remote Software on your computer
2. Click on the Downloads button at the top-right corner of your screen
3. Click on the Firmware button. Follow the onscreen instructions to upgrade the firmware on your Harmony remote
4. Once the firmware upgrade is complete, click on the Update Remote button
5. Test your remote.