20 Most Recent
NorStar M7324 Telephone - Page 5 Questions & Answers
Unable to change the time on the phone
If feature ** 266344 with a password of 266344 didnt work you can also try feature ** 266344 with the password of 23646 or the password of 727587.
Also, on some versions you can try feature **8463(time) with the password of 23646.
I am trying to use a plantronics headset system
You don't say what headset it is, but I will to help you.
If this is a Plantronics
corded "H" series headset you will need to use an
A10 adapter cord,
which plugs into the headset jack on the phone.
If this is what you are
using and you don't hear anything then you need to probably need to
switch to an
M22 amplifier box, which is then plugged into the jack where
the telephone handset was plugged in.
If you are using a
wireless
headset it plugs into the handset jack where the handset cord was
plugged into.
Good luck from
Headsets Direct!
Our phone system rings three
Is this an IP Office?
This is how it works. For some reason the IP Office waits for teh first 2 rings to get caller ID, and then lets the call ring in.
I have Norstar M7310 and
Hello
This generally happens from one of two things. Your voice mail system is connected to your phone system through a station port. If it loses connection it will not communicate with the phone system. Loose wire or connection can cause this. or it has just crashed and will need repair or replacement.
First thing you want to do is unplug the unit wait 15 minutes and plug it back in. wait 10 minutes Try feature 981 from a set that has voicemail. if nothing. hit feature 985. If it comes back with inactive feature now your connection between the units is bad or the unit itself is bad. If it comes back with the voicemail intercom # and you cant get into any mailboxes it has lost all programming.Try this first.
Line 5 doesn't ring on one phone
That is done thru config programming, you need to add line 5, appearance and ring to station. This will automatically put the line on your next line button.
f** config
Not finding what you are looking for?