20 Most Recent RCA RCU300WBL Remote Control - Page 4 Questions & Answers

Try 350. if that dont work then try the code search.
Turn on the device you wish
to program.
2. Press and hold CODE SEARCH
until the INDICATOR LIGHT
lights, then release CODE
SEARCH.
3. Press and release the device
button for the device you are
programming (TV, VCR/DVD or
DBS/CABLE). The INDICATOR
LIGHT will blink once then
remain lit.
4. Press and release OFF/ON until
your device turns off.
Important: You may have to press
OFF/ON up to 200 times.
5. When your device turns off,
press the ENTER button, the
INDICATOR LIGHT will go off.

For codes click on link below.

http://remotefinder.rca.com/default.aspx?site=rca

Good Luck

May I get the model # so I can help you more

RCA RCU300 Remote Control Manual

RCA RCU300 Remote Control Code List

Don't forget to rate if this was helpful :-)

Hi,
Try the below website.If you can fine your tv from list you can programme it.Try using the auto programme.
HI,

Direct Code Entry:

Find the code your device.

1. Press and hold "CODE SEARCH".

2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

3. Enter the 3-digit code number.

4. Release "CODE SEARCH".

5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes

Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".

3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

4. Release "CODE SEARCH".

5. Press ON/OFF repeatedly until the device turns off.

6. When the device shuts off press and release ENTER.

7. Try using the remote. If it does not function repeat steps 1 through 6


To Get The Code Please Go To Below Website:

http://www.rcaaccessories.com/remotefinder/

You need to select the following information from the drop down list

1.Model of the remote
2.Type of device to which you want to program(TV/DVD/VCR)

Thank you

all the codes can be found here:

http://remotefinder.rca.com/default.aspx?site=rca

HI,

Direct Code Entry:

Find the code your device.

1. Press and hold "CODE SEARCH".

2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

3. Enter the 3-digit code number.

4. Release "CODE SEARCH".

5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes

Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".

3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

4. Release "CODE SEARCH".

5. Press ON/OFF repeatedly until the device turns off.

6. When the device shuts off press and release ENTER.

7. Try using the remote. If it does not function repeat steps 1 through 6


Hi,
To get the code please go to below website

http://www.rcaaccessories.com/remotefinder/

Please
Provide model of your remote
device to be programmed (VCR,TV)

Thanx

Hi,

The codes are

004 ,048,049,073,080,162,169,180

Thanx

http://www.amazon.com/One-All-3-Device-Universal-Control/dp/B0002D0FI2

http://www.xdiv.com/remotes/

I recentlly built a device for quadriplic paitients so they can have more control of their lives, namly the T.V. REMOTE.

Using a stadard remote control switch in conjuction with a chin switch, the patient can have access to change channels in a up motion, in other words they go from CHANNEL One through 99 (if your channels go up that far.) the only draw back so far is that they cannot control the volume and have to scan the channels 1-99 if they pass their favorate channel.
But it's great for independence sake.

I will attempt in the next few weeks to build a web site to show the actual design so one can build this at home.

in the mean time e-mail me or call me 24-7
if you desperatlly need this now. I will try to talk you through it. NO CHARGE EVER!!!!!!


Best of luck and may god bless you all.

DANIEL STREET
559-322-9073
[email protected]

try code 236, works for my apex tv/dvd combo and a rcu300wbl remote

Your codes are, 002,003,004,008,012,019,062,068,069,075,076,086,087,088,130,132,134,163,183,196. hope this was helpfull..

If it's an newer Zenith TV(LCD/PLASMA/DLP) it might be that the RC300 does not have the codes for the newer models, but if it's a picture tube TV(CRT) and the zenith codes given to you in the code list are not working try the code search procedure(scans and transmits all codes one at a time)you will have to turn your TV on to continue with this procedure. If you don't have a users manual you can download one from rca.com/accessories/universalremotes. You can also try the codes listed for LG, they could work.

http://support.radioshack.com/support_video/doc67/67859.pdf

That is the manual with all the code listings you will need. Try the Emerson codes for the ILO tv. 171 seems to be pretty popular.

http://support.radioshack.com/support_video/doc67/67859.pdf

That is the manual with all the code listings you will need.